| 热处理工艺对车轮残余应力的影响 |
| |
| 引用本文： | 沈晓辉,赵亚琼,安涛,章静,闫军.热处理工艺对车轮残余应力的影响[J].钢铁,2007,42(10):68-71. |
| |
| 作者姓名： | 沈晓辉 赵亚琼 安涛 章静 闫军 |
| |
| 作者单位： | 1. 安徽工业大学材料科学与工程学院,安徽,马鞍山,243002
2. 安徽工业大学材料科学与工程学院,安徽,马鞍山,243002;马鞍山钢铁股份有限公司车轮公司,安徽,马鞍山,243010 |
| |
| 摘 要： | 运用有限元法,综合考虑了温度、相变及应力的耦合作用,对车轮热处理残余应力及热处理工艺对它的影响规律进行了分析.模拟分析表明,马钢生产的HDSA车轮踏面的最大周向残余压应力为140MPa左右,压应力区深度达到38.2 mm.得到了淬火温度、淬火时间、回火温度和回火时间对踏面上周向残余压应力和踏面下压应力区深度的影响规律,其中回火温度对踏面上的残余应力影响最大.
|
| 关 键 词： | 车轮 热处理 残余应力 影响 有限元 |
| 文章编号： | 0449-749X（2007）10-0068-04 |
| 修稿时间： | 2007-03-22 |
Influence of Heat Treatment Parameters on Residual Stress of Railway Wheel |
| |
| SHEN Xiao-hui,ZHAO Ya-qiong,AN Tao,ZHANG Jing,YAN Jun.Influence of Heat Treatment Parameters on Residual Stress of Railway Wheel[J].Iron & Steel,2007,42(10):68-71. |
| |
| Authors: | SHEN Xiao-hui ZHAO Ya-qiong AN Tao ZHANG Jing YAN Jun |
| |
| Abstract: | The influence of heat treatment parameters on residual stress of railway wheel ware analyzed with finite element method with consideration of coupling of temperature, phase transformation and stress. Residual circumferential stress in the tread of HDSA wheel reached 140 MPa, and the depth below the tread of the compressive stress region was 38. 2 mm. The influence of quenching temperature, quenching time, temper temperature and temper time on residual stress was clarified. Among these parameters, temper temperature has the biggest influence on the residual stress. |
| |
| Keywords: | railway wheel heat treatment residual stress influence finite element |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
