| 球磨时间对铁基胎体显微结构和性能的影响 |
| |
| 引用本文： | 沈立娜,李树辉,阮海龙,欧阳志勇.球磨时间对铁基胎体显微结构和性能的影响[J].探矿工程,2012,39(5):78-80. |
| |
| 作者姓名： | 沈立娜 李树辉 阮海龙 欧阳志勇 |
| |
| 作者单位： | [1]北京探矿工程研究所,北京100083 [2]广西第四地质队,广西南宁530031 |
| |
| 摘 要： | 采用球磨法对铁基胎体粉末进行预处理，利用扫描电镜（SEM）、X射线衍射（XRD）以及洛氏硬度计、万能试验机等分析测试手段，系统研究了球磨时间对铁基胎体粉末显微结构以及烧结性能的影响。结果表明：随着球磨时间的增加，晶粒尺寸不断细化和均匀化。对于本文中所采用的铁基胎体粉末配方，存在一个最合理的球磨时间，此时，晶粒细化和团聚达到动态平衡，胎体材料的烧结性能达到最高。球磨时间继续延长，晶粒容易发生团聚，烧结性能有所降低。
|
| 关 键 词： | 球磨时间 铁基胎体 烧结性能 金刚石钻头 |
| 收稿时间： | 2011/11/1 0:00:00 |
| 修稿时间： | 2012/2/28 0:00:00 |
Effect of Ball-milling Time on Microstructure and Properties of Fe-based Matrix Material |
| |
| Affiliation: | SHEN Li-na , LI Shu- hui, RUAN Hai-long , OUYANG Zhi-yong ( 1. Beijing Institute of Exploration Engineering, Beijing 100083, China; 2. Guangxi Fourth Geological Team, Nanning Guangxi 530031, China) |
| |
| Abstract: | The Fe-based matrix powder preconditioning was prepared by ball-milling method. The effects of milling time on microstructure and sintering properties of the powder were systematically investigated by means of SEM, XRD, Rockwell hardness tester and universal testing machine. The results show that with the increase of the milling time, the micro-particles are well dispersed and uniformly distributed, and crystal size of powder is decreased continuously. When the milling time is up to a proper time, dynamic balance state forms between grain growth and grain size decrease, meanwhile sintering properties are the highest. When the milling time exceeds 12h, the sintering properties of the powder reduce, and the powder is easy to aggregate. |
| |
| Keywords: | ball-milling time Fe-based matrix sintering properties diamond bit |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《探矿工程》浏览原始摘要信息 |
|
点击此处可从《探矿工程》下载全文 |
|
