| 套类零件三维CAD/CAPP系统的研究与开发 |
| |
| 引用本文： | 高自成,徐学林,肖旬.套类零件三维CAD/CAPP系统的研究与开发[J].机床与液压,2006(12):75-77,80. |
| |
| 作者姓名： | 高自成 徐学林 肖旬 |
| |
| 作者单位： | 1. 中南林学院,湖南长沙,410004
2. 南华大学,湖南衡阳,421001 |
| |
| 摘 要： | 套类零件通常是指零件外形的长度和直径之比大于0．5的中空回转体零件，在这类零件的CAPP系统开发中必须研究工艺系统中许多实际的细节问题如工装夹具的选择和设计等。本文根据这类零件的特点，设计了基于VC6．0和Solidworks的套类零件的三维定量化的CAD／CAPP系统，并说明了其实现方法。
|
| 关 键 词： | 套类零件 |
| 文章编号： | 1001-3881（2006）12-075-3 |
| 收稿时间： | 2005-10-25 |
| 修稿时间： | 2005-10-25 |
The Study and Development of the Jacket Parts Three Dimensional and Quantity Determined CAD/CAPP System |
| |
| GAO Zicheng,XU Xuelin,XIAO Xun.The Study and Development of the Jacket Parts Three Dimensional and Quantity Determined CAD/CAPP System[J].Machine Tool & Hydraulics,2006(12):75-77,80. |
| |
| Authors: | GAO Zicheng XU Xuelin XIAO Xun |
| |
| Affiliation: | 1. Central South Forestry University, Changsha Hunan 410004, China; 2. Nanhua University, Hengyang Hunan 421001, China |
| |
| Abstract: | Generally,the jacket parts is one of the type of the rotational parts which is spare in the center,and the ratio of the length and diameter is more than 1/2,so in the CAPP system development of this type of parts,many particular questions such as the the selection of frock and clamp or the reamer for process must be considered.According to the characters of this type of parts,a three dimensional and quantity determined CAD/CAPP system of the jacket parts was designed which is based on Visual C++ 6.0 and Solidworks,the method of realization was illuminate. |
| |
| Keywords: | VC6 0 SolidWorks CAPP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
