|
|||||
|
|
| 水压机柱塞失效分析 | |
| 引用本文： | 崔约贤,王长利,张新梅,崔丽,管红英,孙泰峰,丰育滨.水压机柱塞失效分析[J].理化检验(物理分册),2002,38(4):167-168,171. |
| 作者姓名： | 崔约贤 王长利 张新梅 崔丽 管红英 孙泰峰 丰育滨 |
| 作者单位： | 1. 哈尔滨工业大学,哈尔滨,150001 2. 哈尔滨锅炉有限公司,哈尔滨,150046 3. 东北轻合金有限责任公司,哈尔滨,150051 |
| 摘 要： | 用光学显微镜，扫描电镜和能谱仪对水压机柱塞表面孔坑，沟槽进行了分析，结果表明，由于夹杂物（尤其是表层夹杂物）与块状铁素体的存在以及淬硬层分布不均匀，使柱塞在使用过程中出现点蚀，并在高压水冲击下形成沟槽，导致柱塞密封失效。 |
| 关 键 词： | 柱塞 夹杂物 点蚀 沟槽 水压机 失效分析 机械加工 45钢 |
| 文章编号： | 1001-4012(2002)04-0167-03 |
FAILURE ANALYSIS OF HYDRAULIC PRESS TRUNK PISTON |
|
| CUI Yue xian,WANG Chang li,ZHANG Xin mei.FAILURE ANALYSIS OF HYDRAULIC PRESS TRUNK PISTON[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2002,38(4):167-168,171. | |
| Authors: | CUI Yue xian WANG Chang li ZHANG Xin mei |
| Abstract: | The oillets and furrows on the surface of hydraulic press trunk piston were analyzed by means of metallography, SEM and EDS. The results indicated that both the inclusions and ferrite blocks in the surface layer of piston as well as the inhomogeneous distribution of hardening layer contributed to the formation of corrosive pitting of the piston during service, and the oillets were developed into furrows gradually by the eroding of high press water. |
| Keywords: | Trunk piston Inclusions Corrosive pitting Furrow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
