| 厌氧接触+射流曝气+Fenton流化床技术处理制浆造纸废水运行实例 |
| |
| 引用本文： | 王伟,禹建伦,牛涛,张鹏,张杰,代吉华,唐启.厌氧接触+射流曝气+Fenton流化床技术处理制浆造纸废水运行实例[J].纸和造纸,2020(1):32-35. |
| |
| 作者姓名： | 王伟 禹建伦 牛涛 张鹏 张杰 代吉华 唐启 |
| |
| 作者单位： | 驻马店市白云纸业有限公司;河南君和环保科技有限公司 |
| |
| 摘 要： | 介绍厌氧接触+射流曝气+Fenton流化床技术处理制浆造纸生产废水的工程参数、运行效果和工程效益。六个月的运行数据显示,厌氧单元出水COD平均浓度为1321 mg·L^-1,平均去除率为61%;好氧单元出水COD浓度为185 mg·L^-1左右,平均去除率为78%;深度处理部分COD出水浓度为44 mg·L^-1,平均去除率为73%,可实现废水达标排放。
|
| 关 键 词： | 制浆造纸废水 厌氧接触法 斜板沉淀池 射流曝气 Fenton流化床 |
Operation Example of Anaerobic Contact+Jet Aeration+Fenton Fluidized Bed Technology for Treating Pulp and Paper Wastewater |
| |
| WANG Wei,YU Jian-lun,NIU Tao,ZHANG Peng,ZHANG Jie,DAI Ji-hua,TANG Qi.Operation Example of Anaerobic Contact+Jet Aeration+Fenton Fluidized Bed Technology for Treating Pulp and Paper Wastewater[J].Paper and Paper Making,2020(1):32-35. |
| |
| Authors: | WANG Wei YU Jian-lun NIU Tao ZHANG Peng ZHANG Jie DAI Ji-hua TANG Qi |
| |
| Affiliation: | (Zhumadian Baiyun Paper Co.,Ltd.,Zhumadian,Henan Province,463100 China;Henan Junhe Environmental Protection Technology Co.,Ltd.,Zhengzhou,Henan Province,450001 China) |
| |
| Abstract: | The engineering parameters,operation results and engineering benefits of anaerobic contact + jet aeration + Fenton fluidized bed technology for the treatment of pulp and paper production wastewater are introduced.The six-month operation data showed that the average concentration of COD in the effluent unit effluent was 1321 mg·L^-1,and the average removal rate was 61%;the COD concentration in the aerobic unit effluent was about 185 mg·L^-1,and the average removal rate was 78%;the COD effluent concentration is 44 mg·L^-1,and the removal rate is 73% on average,achieving wastewater discharge. |
| |
| Keywords: | pulp and papermaking wastewater anaerobic contact process inclined plate sedimentation tank jet aeration Fenton fluidized bed |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
