振动顺料机动态特性仿真研究及优化设计

目的为保证振动顺料机在各种复杂工况下的工作可靠性,通过对振动顺料过程的仿真研究,优化其动态特性,提高顺料效率。方法从振动系统激振方式的角度出发,对运动激励和力激励2种激振方式的动态可靠性进行分析和比较,在此基础上以采用曲柄滑块机构的强制运动激励为激振方式的振动顺料机为研究对象,利用Solid Works软件建立振动顺料机的三维装配体模型,并在ADAMS中进行相关仿真模型的建立及其参数试验与优化。结果曲柄转速和曲柄长度对顺料效率具有明显影响,通过仿真得到了振动顺料机曲柄滑块机构中曲柄转速和曲柄长度的一组最优参数值分别为376 r/min和12.85mm。结论通过对曲柄转速和曲柄长度参数的仿真试验及其优化设计,提高了振动顺料机的顺料效率。

Simulation Research and Optimal Design of Dynamic Characteristics of Vibration Feeder

The work aims to optimize the dynamic characteristics and improve the feeding efficiency by conducting the simulation research on the vibration feeding process, for the purpose of ensuring the working reliability of vibration feeder under various complicated working conditions. Starting from the excitation mode of the vibration system, the dynamic reliability of two excitation modes (motion excitation and force excitation) was analyzed and compared. On the basis of that, the vibration feeder based on the forced motion excitation of the crank slider mechanism was the object of the research. A three-dimensional assembly model of vibration feeder was established with SolidWorks, and the establishment of the relevant simulation model and its parameter test and optimization were completed in ADAMS. The crank speed and crank length had obvious influence on feeding efficiency. By means of simulation, a set of optimal parameter values of crank speed (376 r/min) and crank length (12.85 mm) in the crank slider mechanism of vibration feeder were obtained. The simulation test and its optimal design of the crank speed and crank length have improved the feeding efficiency of vibration feeder.