| 汽车驱动桥壳成形过程工艺分析及数值模拟 |
| |
| 引用本文： | 贾承安,郝滨海,于斌.汽车驱动桥壳成形过程工艺分析及数值模拟[J].模具技术,2007(6):9-11,49. |
| |
| 作者姓名： | 贾承安 郝滨海 于斌 |
| |
| 作者单位： | 山东大学,材料科学与工程学院,山东,济南,250061 |
| |
| 摘 要： | 驱动桥桥壳是汽车上重要的承载件和传力件.通过建立了驱动桥壳三维模型和有限元分析,形成一套可靠的数值仿真分析方案.采用理论分析和有限元模拟技术相结合的方法,将CAD软件Pro/E、板料成形模拟软件Dynaform结合起来,进行分析和研究.分析了桥壳类零件成形过程的变形规律和影响因素,改善工艺方案,改进模具设计,提高工作效率,获得有益于工程实际的结论.
|
| 关 键 词： | 驱动桥壳 数值模拟 工艺分析 汽车 驱动桥壳 成形过程 工艺分析 数值模拟 cover drive automobile forming numerical simulation analysis 工程 工作效率 模具设计 改进 工艺方案 改善 影响因素 变形规律 类零件 |
| 文章编号： | 1001-4934（2007）06-0009-03 |
| 收稿时间： | 2007-06-25 |
| 修稿时间： | 2007年6月25日 |
Process analysis and numerical simulation for the forming of automobile drive axle cover |
| |
| JIA Chen-gan,HAO Bin-hai,YU Bin.Process analysis and numerical simulation for the forming of automobile drive axle cover[J].Die and Mould Technology,2007(6):9-11,49. |
| |
| Authors: | JIA Chen-gan HAO Bin-hai YU Bin |
| |
| Abstract: | The automobile drive axle cover is an important load bearing and transferring component. Through establishing the 3D model of drive axle cover and conducting the finite element simulation, a reliable numerical analyzing scheme was figured out. Using the theoretical and the finite element simulation method, we combined the CAD software Pro/E and the sheet metal forming simulation software Dynaform together. By analyzing the forming rules and influencing factors, more practical conclusions has been achieved to reduce cost and time, and to improve design and efficiency. |
| |
| Keywords: | drive axle cover numerical simulation process analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
