Wax Diffusivity: Is It a Physical Property or a Pivotable Parameter?

In order to predict wax deposition problems the key parameter is the wax diffusion coefficient. While it is quite easy to find measured diffusivity values for well-defined compounds at quite low concentrations, very few experimental data are available for wax diffusivity in oil. Most of the literature data are estimated by interpolating experimental data obtained by loop tests and then they are affected by a noticeable uncertainty. In fact this parameter collects the whole uncertainty of the test and the paradoxical situation is that the key parameter ends to be the most error-affected or to be used as a pivotable parameter in “predictive” models. This article describes an experimental procedure to determine the overall diffusivity coefficient of waxes into the oil; the main advantage of this technique is that it allows the direct measure of diffusivity on the oil. Besides it is a very simple and straightforward technique. Results obtained were used to gain insight into the deposition process; the conclusion was that, due to the counter-intuitive diffusivity dependence on temperature, it is likely that noncompositional models available at present are structurally incorrect.