首页 | 官方网站   微博 | 高级检索  
     

某高速公路服务区污水处理站工程改造
引用本文:王现丽,吴俊峰,时鹏辉.某高速公路服务区污水处理站工程改造[J].平顶山工学院学报,2009,18(6).
作者姓名:王现丽  吴俊峰  时鹏辉
作者单位:河南城建学院环境与市政工程系,河南,平顶山,467044
摘    要:对某高速公路服务区原有污水处理工艺出水不达标的现状进行分析,通过增加预处理等措施,在原有构筑物基础上对现有污水处理工艺进行改造.调试运行结果表明:改造后的工艺在进水COD、BOD、SS和油分别为298mg/L、117mg/L、326mg/L、27mg/L时,出水COD、BOD、SS和油浓度分别为45mg/L、18mg/L、45mg/L、5mg/L,去除率分别达到84.9%、84.6%、86.2%、81.5%,出水水质达到<污水综合排放标准>(GB8978-1996)二级排放标准.

关 键 词:服务区污水处理站  工艺改造  工程设计

On engineering modifications of sewage treatment plant of highway service area
WANG Xian-li,WU Jun-feng,SHI Peng-hui.On engineering modifications of sewage treatment plant of highway service area[J].Journal of Pingdingshan Institute of Technology,2009,18(6).
Authors:WANG Xian-li  WU Jun-feng  SHI Peng-hui
Affiliation:WANG Xian-li,WU Jun-feng,SHI Peng-hui (Environmental , Municipal Engineering Department,Henan University of Urban Construction,Pingdingshan 467044,China)
Abstract:Analysis is made on the status of non-compliance water of the current wastewater treatment process in highway service area.By increasing the pre-processing and other measures on the basis of the existing structures,the existing wastewater treatment process is reformed.Commissioning operation results show that transformed process in the influent COD,BOD,SS and oil,respectively 298mg/L,117mg/L,326mg/L,27mg/L,the effluent COD,BOD,SS and oil concentrations respectively are 45mg/L,18mg/L,45mg/L,5mg/L,and the rem...
Keywords:sewage treatment station of service area  process reform  engineering design  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号