| 工艺参数和材料性能对板料成形回弹的影响 |
| |
| 引用本文： | 戚鹏,辛献杰,王永智.工艺参数和材料性能对板料成形回弹的影响[J].锻压装备与制造技术,2007,42(1):37-40. |
| |
| 作者姓名： | 戚鹏 辛献杰 王永智 |
| |
| 作者单位： | 烟台市生产力促进中心,山东,烟台,264000 |
| |
| 摘 要： | 分析总结了数值模拟中模拟参数（有限无算法、单元类型、材料模型、本构方程、积分点选取、接触和摩擦法则等）对回弹模拟精度的影响。对一细长支腿零件的工艺成形过程进行了数值模拟，研究了工艺参数及材料性能参数（压边力、凸模圆角半径、凸凹模间隙、板料厚度、摩擦系数、材料硬化指数）对工件回弹的影响。回弹角随凸模圆角半径和凸凹模间隙的增大而增大，随压边力、扳料厚度、摩擦系数和材料硬化指数的增大而减小。
|
| 关 键 词： | 机械制造 弯曲 回弹 数值模拟 |
| 文章编号： | 1672-0121(2007)01-0037-04 |
| 修稿时间： | 2006年11月3日 |
Influence of Process Parameters and Material Properties on the Springback in Sheet Metal Forming |
| |
| QI Peng,XIN Xianjie,WANG Yongzhi.Influence of Process Parameters and Material Properties on the Springback in Sheet Metal Forming[J].China Metalforming Equipment & Manufacturing Technology,2007,42(1):37-40. |
| |
| Authors: | QI Peng XIN Xianjie WANG Yongzhi |
| |
| Abstract: | Influence of simulation parameters on simulation precision of the springback,such as elements type, material types,constitutive equations,integral point selections, contact conditions, friction rules, and like that, has been analyzed.The influence of process parameters and material properties on the springback has been studied by the process simulation of a slender leg part.The springback angle increases with the increase of the punch round radius and clearances between the punch and the die while decreases with increase of the blank holder force,sheet thickness, friction coefficient and material hardening exponent. |
| |
| Keywords: | Sheet metal forming Springback Numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
