| 某柴油机滤清器支架的仿真计算及结构优化 |
| |
| 引用本文： | 葛长景,平涛,巫立民,李丽婷,张华兵.某柴油机滤清器支架的仿真计算及结构优化[J].柴油机,2020,42(1):28-31. |
| |
| 作者姓名： | 葛长景 平涛 巫立民 李丽婷 张华兵 |
| |
| 作者单位： | 七一一研究所，上海 201108,七一一研究所，上海 201108,七一一研究所，上海 201108,七一一研究所，上海 201108,七一一研究所，上海 201108 |
| |
| 摘 要： | 针对某型柴油机在工作过程中出现的滤清器支架失效问题,采用ABAQUS、FEMFAT等软件对该支架进行有限元分析。通过模态分析评估支架是否存在共振风险;通过静强度和疲劳寿命校核,评估支架是否存在疲劳失效风险。在此基础上对原支架结构进行了优化。改进后的支架随整机通过了可靠性试验验证。结果表明:支架优化方案合理,能够满足使用要求。
|
| 关 键 词： | 柴油机 滤清器 支架 有限元分析 |
| 收稿时间： | 2019/9/4 0:00:00 |
| 修稿时间： | 2019/10/10 0:00:00 |
Simulation and Structure Optimization of the Filter Bracket on a Diesel Engine |
| |
| Ge Changjing,Ping Tao,Wu Limin,Li Liting and Zhang Huabing.Simulation and Structure Optimization of the Filter Bracket on a Diesel Engine[J].Diesel Engine,2020,42(1):28-31. |
| |
| Authors: | Ge Changjing Ping Tao Wu Limin Li Liting and Zhang Huabing |
| |
| Affiliation: | Shanghai Marine Diesel Engine Research Institute, Shanghai 201108,Shanghai Marine Diesel Engine Research Institute, Shanghai 201108,Shanghai Marine Diesel Engine Research Institute, Shanghai 201108,Shanghai Marine Diesel Engine Research Institute, Shanghai 201108 and Shanghai Marine Diesel Engine Research Institute, Shanghai 201108 |
| |
| Abstract: | The filter bracket of a diesel engine was broken and out of work during engine operation. To deal with this failure, ABAQUS and FEMFAT software was used to carry out finite element analysis. The risk of resonance of the filter bracket was evaluated by modal analysis. The risk of fatigue failure of the filter bracket was evaluated by static strength and fatigue analysis. Based on the analysis results, the structure of the filter bracket was optimized. The optimized bracket passed the reliability test verification with the whole engine. The results show that the optimization scheme of the filter bracket is reasonable, and can meet with the application requirements. |
| |
| Keywords: | diesel engine filter bracket finite element analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《柴油机》浏览原始摘要信息 |
|
点击此处可从《柴油机》下载全文 |
|
