首页 | 官方网站   微博 | 高级检索  
     

焊剂碱度对管线钢埋弧焊熔敷金属显微组织和韧性的影响
引用本文:国旭明,杨柯,钱百年,张艳,李晶丽.焊剂碱度对管线钢埋弧焊熔敷金属显微组织和韧性的影响[J].钢铁研究学报,2001,13(5):51-54.
作者姓名:国旭明  杨柯  钱百年  张艳  李晶丽
作者单位:1. 沈阳工业大学材料系辽宁 沈阳 110023 中国科学院金属研究所焊接室辽宁 沈阳 110015
2. 中国科学院金属研究所焊接室辽宁 沈阳 110015
3. 沈阳工业大学材料系辽宁 沈阳 110023
基金项目:国家“973”重大基础研究项目 ( G19980 6 15 11)
摘    要:研究了焊剂碱度对管线钢时弧焊熔敷金属显微组织和韧性的影响。结果表明:随焊剂碱度的提高,焊缝中锰、钛含量产加,而氧、硅含量降低,同时具有有利于针状铁素体形核的夹杂物尺寸和分布,促进了奥氏体晶粒内针状铁素体的形成,提高了熔敷金属的低温冲击韧性。

关 键 词:管线钢  焊剂碱度  针状铁素体  低温韧性  埋弧焊  熔敷金属
文章编号:1001-0963(2001)05-0051-04
修稿时间:2000年11月15

Effect of Flux Basicity on Microstructure and Low Temperature Toughness of SAW Deposited Metals on Pipe-Line Steel
GUO Xu ming ,QIAN Bai nian ,ZHANG Yan ,LI Jing li ,YANG Ke.Effect of Flux Basicity on Microstructure and Low Temperature Toughness of SAW Deposited Metals on Pipe-Line Steel[J].Journal of Iron and Steel Research,2001,13(5):51-54.
Authors:GUO Xu ming    QIAN Bai nian  ZHANG Yan  LI Jing li  YANG Ke
Affiliation:GUO Xu ming 1,2,QIAN Bai nian 1,ZHANG Yan 2,LI Jing li 1,YANG Ke 1
Abstract:The effect of flux basicity on the microstructures and toughness of SAW deposited metals on pipe line was investigated. The results showed that the contents of Mn? Ti are increased and the contents of O? Si are reduced with the increasing of flux basicity. The quantity of the inclusions with suitable size favorable to nucleation of acicular ferrite is increased, then the formation of acicular ferrite in austenite is promoted and the low temperature toughness of deposited metals is increased.
Keywords:pipe  line steel  flux basicity  acicular ferrite  low temperature toughness
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号