| 埋入式基板微尺度球栅阵列焊点三点弯曲应力应变分析 |
| |
| 引用本文： | 殷芮,黄春跃,黄根信,路良坤,梁颖.埋入式基板微尺度球栅阵列焊点三点弯曲应力应变分析[J].焊接学报,2018,39(8):23-27. |
| |
| 作者姓名： | 殷芮 黄春跃 黄根信 路良坤 梁颖 |
| |
| 作者单位： | 1. 桂林电子科技大学 机电工程学院, 桂林 541004;2. 成都航空职业技术学院 电子工程系, 成都 610021 |
| |
| 基金项目： | 国家自然科学基金资助项目（51465012）；四川省科技计划资助项目（2018JY0292）；广西研究生教育创新计划项目（YCSW2018136） |
| |
| 摘 要： | 建立了埋入式基板微尺度球栅阵列焊点三点弯曲应力应变有限元分析模型，分析了焊点材料、焊点间距、PCB支撑跨度及焊点阵列对焊点弯曲应力应变的影响，结果表明，三点弯曲加载条件下，埋入式基板微尺度BGA焊点阵列的最大弯曲应力应变均出现在最外围拐角处焊点上.当三点弯曲加载到相同位移载荷下，SAC387材料焊点的弯曲应力最大，62Sn36Pb2Ag材料焊点的弯曲应力最小；随着支撑跨度的增大，焊点内最大弯曲应力应变均随之减小；随着BGA焊点间距的增大，焊点内部最大弯曲应力应变值均增大；随着BGA焊点阵列数的增大，焊点内部最大应力应变值均增大.
|
| 关 键 词： | 埋入式基板 BGA焊点 三点弯曲加载 有限元分析 应力应变 |
| 收稿时间： | 2017/4/10 0:00:00 |
Stress and strain analysis of embedded substrate micro-scale ball grid array solder joint under three point bending |
| |
| YIN Rui,HUANG Chunyue,HUANG Genxin,LU Liangkun,LIANG Ying.Stress and strain analysis of embedded substrate micro-scale ball grid array solder joint under three point bending[J].Transactions of The China Welding Institution,2018,39(8):23-27. |
| |
| Authors: | YIN Rui HUANG Chunyue HUANG Genxin LU Liangkun LIANG Ying |
| |
| Affiliation: | 1. School of Electro-Mechanical Engineering, Guilin University of Electronic Technology, Guilin 541004, China;2. Department of Electronic Engineering, Chengdu Aeronautic Vocational and Technical College, Chengdu 610021, China |
| |
| Abstract: | The three point bending stress and strain finite element analysis model of embedded substrate micro scale grid electrode array welding spot is established. The influence of solder joint material, spot distance, PCB support span and solder joint array on the bending stress and strain of solder joints is analyzed. The results show that the maximum BGA solder joint of embedded substrate is maximum under the condition of three point bending loading. Bending stress and strain all appear on the solder joints at the most peripheral corner. When the three point bending load is loaded to the same displacement load:the bending stress of the solder joint of the SAC387 material is the largest, the bending stress of the solder joint of the 62Sn36Pb2Ag material is the smallest, and the maximum bending stress and strain in the solder joints decrease with the increase of the span of the support, and the maximum bending stress and strain inside the solder joints increase with the increase of the distance between the BGA solder joints. With the increase of the number of BGA solder joints, the maximum stress and strain values of solder joints increase. |
| |
| Keywords: | embedded type substrate BGA solder joints three point bending load finite element analysis stress and strain |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
