Formation and characteristics of cationic-polymer/bentonite complexes as adsorbents for dyes

The adsorption of cationic polymer, i.e., epicholorohydrin-dimethylamine polyamine (EPI-DMA), on bentonite particles was investigated under various conditions of bulk polymer concentration, pH, inorganic salts, and temperature. The resulting high adsorption rate and alkaline solution (pH = 7–11) effect indicated a strong electrostatic interaction between the clay particles and EPI-DMA molecules. Addition of salt can also influence the adsorption of EPI-DMA onto bentonite by affecting the clay particle sizes, the polymer zeta potential and etc. The Freundlich and Langmuir isotherm models were employed and fit the experimental data well in the low EPI-DMA concentration range 0.5–5.0 mg L^− 1. The enthalpy implied by the temperature dependence of adsorption of EPI-DMA on bentonite is 7.93 kJ mol^− 1, suggesting that neither coordination exchange nor chemical bond forces exit in this system. In addition, at high temperatures, larger amounts of EPI-DMA were adsorbed by bentonite, which indicated that increased entropy in the dissolved EPI-DMA molecules contributes to adsorption. The X-ray diffraction (XRD) analysis showed that besides the EPI-DMA molecules intercalated between the layers of bentonite, excess polymer molecules were adsorbed onto polymer loops protruding from the surface of the complex. The TGA and corresponding DSC plots demonstrated that the EPI-DMA polymer had intercalated into the clay layers and thus the EPI-DMA/bentonite was more hydrophobic than natural bentonite. With the addition of EPI-DMA polymer, the negatively charged clay particles increased to a net positive charge and the capacity for dye removal also went up with increasing polymer contents in EPI-DMA/bentonite complexes.