首页 | 官方网站   微博 | 高级检索  
     

N503萃取分离铁铟的研究
引用本文:高远,王继民,吴昊.N503萃取分离铁铟的研究[J].材料研究与应用,2011,5(1):62-66.
作者姓名:高远  王继民  吴昊
作者单位:广东省工业技术研究院(广州有色金属研究院)稀有金属研究所,广东,广州,510650
摘    要:对真空炉锗渣经氯化蒸馏提锗后的蒸馏残液进行了萃取研究,以N503为萃取剂,研究了残液的酸度、萃取相比、有机相组成、萃取时间等因素对铟、铁萃取率的影响.结果表明,在有机相组成为φ(N503)=50%,φ(异辛醇)=10%,φ(煤油)=40%,W/O相比为3:1,震荡及静止时间均为5 min条件下,当萃取残液酸度为3.4 ...

关 键 词:N503  萃取  分离

Study on separation of indium and iron by extraction with di(1-methyl-heptyl)acetamide(N503)
GAO Yuan,WANG Ji-min,WU Hao.Study on separation of indium and iron by extraction with di(1-methyl-heptyl)acetamide(N503)[J].Journal of Guangdong Non-Ferrous Metals,2011,5(1):62-66.
Authors:GAO Yuan  WANG Ji-min  WU Hao
Affiliation:(Research Department of Rare Metals,Guangdong General Research Institute of Industrial Technology(Guangzhou Research Institute of Non-ferrous Metals),Guangzhou 510651,China)
Abstract:Experiment on In/Fe extraction of lixiviated liquid from chlorination distilled vacuum furnace germanium residue was studied.With N503 as the extractant,the influence of extraction feed acidity,extraction phase ratio(V/V),organic phase composition and extraction time on In/Fe extraction efficiency was examined.The results showed that under the conditions of organic phase being φ(N503)=50%,φ(isooctanol)=10% and φ(kerosene)=40%,W/O=3:1 and both shaking time and standstill time being 5 minutes,and when extraction feed acidity was 3.4mol/L,in which In was 2045mg/L and Fe was5201mg/L,the extraction rate of Fe reached above 98% and the separation ratio of In and Fe was over 5000 by 3-stage countercurrent extraction process.
Keywords:N503  extraction  separation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《材料研究与应用》浏览原始摘要信息
点击此处可从《材料研究与应用》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号