| 清水营煤超细粉碎过程中的影响因素 |
| |
| 引用本文： | 徐志坚,崔岩,任建军,黄晓东,葛晓陵.清水营煤超细粉碎过程中的影响因素[J].中国粉体技术,2010,16(4):69-70,78. |
| |
| 作者姓名： | 徐志坚 崔岩 任建军 黄晓东 葛晓陵 |
| |
| 作者单位： | 1. 华东理工大学,机械与动力工程学院,上海,200237
2. 上海工程技术大学,高等职业技术学院,上海,200437 |
| |
| 摘 要： | 为了制备粒度小于10μm的超细清水营煤粉,采用球磨机对煤粉进行研磨,利用激光粒度仪对超细煤粉进行了粒度分析,得出球磨时间、球煤质量比、填充率、转速等主要因素与煤粉碎效果的关系,确立清水煤超细粉碎的最佳工艺条件。结果表明:采用湿磨方式,在球煤质量比为15∶1、填充率为0.45、转速为100 r/min的工艺条件下,经7 h研磨,清水营煤粉的粒度可达到2.596μm。
|
| 关 键 词： | 清水营煤 超细粉碎 影响因素 |
Influential Factors in Process of Ultrafine Grinding of Coal from Qingshuiying |
| |
| Xu Zhijian,Cui Yan,Ren Jianjun,Huang Xiaodong,Ge Xiaoling.Influential Factors in Process of Ultrafine Grinding of Coal from Qingshuiying[J].China Powder Science and Technology,2010,16(4):69-70,78. |
| |
| Authors: | Xu Zhijian Cui Yan Ren Jianjun Huang Xiaodong Ge Xiaoling |
| |
| Abstract: | In order to prepare the ultrafine powder of coal from Qingshuiying,whose particle size was smaller than 10 μm,the ball mill was used to produce the ultrafine coal powder.The particle size was analyzed by laser grain size analyzer.The main factors influencing coal grinding were found which were grinding time,mass ratio of ball and coal,stuff rate,rotation speed and so on.The best processing conditions for ultrafine grinding of coal from Qingshuiying were set.The results showed that using the wet mode at the rotatory speed of 100 r/min,the mass fraction of ball and coal was 15∶1,the filling rate was 0.45 and the grinding time was 7 h,the particle size of the as-prepared ultrafine coal powder was 2.596 μm. |
| |
| Keywords: | ultrafine coal powder ultrafine grinding influential factor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
