首页 | 官方网站   微博 | 高级检索  
     


Two-phase flow and boiling heat transfer in two vertical narrow annuli
Authors:Peng Changhong  Guo Yun  Qiu Suizheng  Jia Dounan  Nie Changhua
Affiliation:aDepartment of Nuclear & Thermal Power Engineering, Xi’an Jiaotong University, Xian 710049, China;bNuclear Power Institute of China, Chengdu 610041, China
Abstract:Experimental study associated with two-phase flow and heat transfer during flow boiling in two vertical narrow annuli has been conducted. The parameters examined were: mass flux from 38.8 to 163.1 kg/m2 s; heat flux from 4.9 to 50.7 kW/m2 for inside tube and from 4.2 to 78.8 kW/m2 for outside tube; equilibrium mass quality from 0.02 to 0.88; system pressure from 1.5 to 6.0 MPa. It was found that the boiling heat transfer was strongly influenced by heat flux, while the effect of mass velocity and mass quality were not very significant. This suggested that the boiling heat transfer was mainly via nucleate boiling. The data were used to develop a new correlation for boiling heat transfer in the narrow annuli. In the two-phase flow study, the comparison with the correlation of Chisholm Chisholm, D., 1967. A theoretical basis for the Lockhart–Martinelli correlation for two-phase flow. Int. J. Heat Mass Transfer 10, 1767–1778] and Mishima and Hibiki Mishima, K., Hibiki, T., 1996. Some characteristics of air–water two-phase flow in small diameter vertical tubes. Int. J. Multiphase Flow 22, 703–712] indicated that the existing correlations could not predict the two-phase multiplier in the narrow annuli well. Based on the experimental data, a new correlation was developed.
Keywords:
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号