| QU80起重机钢轨断裂原因分析 |
| |
| 引用本文： | 吴雄先,余腾义,杨兵.QU80起重机钢轨断裂原因分析[J].理化检验(物理分册),2010(12):787-790. |
| |
| 作者姓名： | 吴雄先 余腾义 杨兵 |
| |
| 作者单位： | [1]攀枝花钢铁研究院,攀枝花617000 [2]攀钢集团国际经济贸易有限公司,攀枝花617000 |
| |
| 摘 要： | 某U71Mn QU80起重机钢轨经铝热焊焊接后仅使用一个月就发生了断裂失效。对断裂钢轨的化学成分、力学性能、低倍组织和显微组织等进行了分析,以找出起重机钢轨断裂的原因。结果表明:起重机钢轨在进行铝热焊焊接时,铝热焊焊剂形成的钢液发生了溢漏,滴落聚集在钢轨轨底边缘处,熔融形成了宽度约为4 mm的弧形缺口;形成的弧形缺口成为应力集中点,在使用过程中受到起重机车轮的反复作用,最终导致钢轨在缺口处发生了早期断裂失效。
|
| 关 键 词： | 起重机钢轨 铝热焊 断裂 钢液溢漏 |
Fracture Reason Analysis of a QU80 Crane Rail |
| |
| WU Xiong-xian,YU Teng-yi,YANG Bing.Fracture Reason Analysis of a QU80 Crane Rail[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2010(12):787-790. |
| |
| Authors: | WU Xiong-xian YU Teng-yi YANG Bing |
| |
| Affiliation: | 1.Panzhihua Iron＆Steel Research Institute,Panzhihua 617000,China; 2.Pangang Group International Economic ＆ Trading Corporation.,Ltd.,Panzhihua 617000,China) |
| |
| Abstract: | A U71Mn QU80 crane rail fractured which serviced only for 1 month after exothermic welding. Means such as chemical compositions analysis,mechanical properties test,macrostructure and micros tructure examination were used to analyze fracture reason of the crane rail.The results show that while the rail was welded, liquid steel generated by welding flux of exothermic welding spilled.Drops of the flux gathered at bottom of the crane raile and produced a arc-shaped notch with size of 4 mm.The notch became stress concentration point during the service process and resulted in fracture of the crane rail under the cycle of external force. |
| |
| Keywords: | crane rail exothermic welding fracture liquid steel spilling |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
