| 压力容器接管部位的可靠性设计研究 |
| |
| 引用本文： | 刘有艳,周昌玉.压力容器接管部位的可靠性设计研究[J].压力容器,2011,28(1):18-22,50. |
| |
| 作者姓名： | 刘有艳 周昌玉 |
| |
| 作者单位： | 南京工业大学机械与动力工程学院,江苏南京,210009 |
| |
| 摘 要： | 使用ANSYS软件对某压力容器筒径，不同开孔直径壳体，共3个模型的开孔接管部位进行分析设计，同时提出最弱环模型对接管部位应力强度进行可靠性评定。研究结果表明，在接管需要补强时采用补强圈或厚壁接管补强，均可有效地改善孔边应力集中；随着开孔率的增大，厚壁补强接管部位的可靠性大于等面积补强法所得结果；最后提出厚壁补强时合适的可靠度取值。
|
| 关 键 词： | 压力容器 开孔接管补强 ANSYS 可靠性 |
Study on Reliability Design of Pressure Vessel Nozzle |
| |
| LIU You-yan,ZHOU Chang-yu.Study on Reliability Design of Pressure Vessel Nozzle[J].Pressure Vessel Technology,2011,28(1):18-22,50. |
| |
| Authors: | LIU You-yan ZHOU Chang-yu |
| |
| Affiliation: | LIU You-yan,ZHOU Chang-yu (Nanjing University of Technology,College of Mechanical and Power Engineering,Nanjing 210009,China) |
| |
| Abstract: | The weakest chain model was proposed to evaluate the reliability of stress intensity of the nozzles with different diameters of one cylinder designed by analysis method by using ANSYS software.The result covers three aspects:the pad reinforcement and thick-walled reinforcement can effectively decrease the stress concentration of the nozzle area;the reliability of the thick-walled reinforcement is higher than that of pad reinforcement with the increase of the nozzle diameter;at last the reasonable reliabilit... |
| |
| Keywords: | ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
