| 滚挤压加工对颗粒增强金属基复合材料表面粗糙度的影响 |
| |
| 引用本文： | 韩立发,屈盛官,夏伟.滚挤压加工对颗粒增强金属基复合材料表面粗糙度的影响[J].机床与液压,2007,35(6):19-21. |
| |
| 作者姓名： | 韩立发 屈盛官 夏伟 |
| |
| 作者单位： | 1. 东莞理工学院机电工程系,广东东莞,523808
2. 华南理工大学机械工程学院,广州,510641 |
| |
| 摘 要： | 将滚挤压加工工艺引入到颗粒增强铁基复合材料的精加工领域,得出了各工艺参数、增强相含量等因素对表面粗糙度的影响规律,分析了这种复合材料的滚挤压加工机理,并优化了工艺条件.
|
| 关 键 词： | 滚挤压 表面粗糙度 铁基复合材料 温压 滚挤压加工 颗粒增强 金属基复合材料 表面粗糙度 影响 Metal Matrix Composites Surface Roughness Process 工艺条件 优化 加工机理 分析 规律 因素 增强相含量 工艺参数 加工领域 增强铁基复合材料 加工工艺 |
| 文章编号： | 1001-3881（2007）6-019-3 |
| 修稿时间： | 2006-07-24 |
Influence of Burnishing Process on Surface Roughness of Particulate-reinforced Metal Matrix Composites |
| |
| HAN Lifa,QU Shengguan,XIA Wei.Influence of Burnishing Process on Surface Roughness of Particulate-reinforced Metal Matrix Composites[J].Machine Tool & Hydraulics,2007,35(6):19-21. |
| |
| Authors: | HAN Lifa QU Shengguan XIA Wei |
| |
| Affiliation: | 1. Department of Mechanical Engineering, Dongguan University of Technology, Dongguan Guangdong 523808, China; 2. School of Mechanical Engineering, South China University of Technology, Guangzhou 510641, China |
| |
| Abstract: | The burnishing process was introduced into the finish machining of particulate-reinforced iron-based composites, the influence of process parameters and material characteristics on surface roughness were discussed. Meanwhile, the burnishing mechanism of such composites was analyzed and the process parameters were optimized. |
| |
| Keywords: | Burnishing Surface roughness Iron-based composites Warm compaction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
