| Abstract: | Poly(arylene ether phosphine oxide)s (PEPO) were prepared and utilized to coat carbon fibers to enhance the interfacial adhesion with vinyl ester resins. For comparison, poly(arylene ether sulfone) (PES), Udel® P-1700, and Ultem® 1000 were also used. The interfacial shear strength (IFSS) of thermoplastic polymer-coated fibers was measured via microbond pull-out tests. The interfacial adhesion between thermoplastics and as-received carbon fibers was also measured in order to investigate the adhesion mechanism. Thermoplastic polymer-coated fibers exhibited a higher IFSS than the as-received fibers with vinyl ester resin, and with thermoplastic polymers. PEPO-coated fibers showed the highest IFSS, followed by Udel®, PES, and Ultem®-coated fibers. The high IFSS obtained with PEPO coating could be attributed to the phosphine oxide moiety, which provided a strong interaction with functional groups in the vinyl ester resin and also on carbon fibers. A diffusion study revealed the formation of a clear interphase not only between PEPO and the vinyl ester resin, but also between Udel® (PES or Ultem®) and the vinyl ester resin, although the morphology of the two interphases differed greatly. |
