“FORWARD MIXING” MODEL: APPLICATION TO PULSED PLATE EXTRACTION COLUMN OPERATION IN THE EMULSION REGION

The “Forward Mixing” model has been applied to data obtained from a 22 cm diameter pulsed plate extraction column. Measurements of drop size distributions, dispersed phase hold-up and concentration profiles for two systems (toluene-acetone-water and n-butanol-succinic acid-water) of quite different properties were made with the column operating in the emulsion region. Generated drop size distribution function parameters, size-dependent slip velocities and mass transfer coefficients, and continuous phase axial dispersion coefficients were accurate in predicting dispersed phase hold-up and extraction efficiencies (or the related plug flow number of transfer units). These parameters were correlated with phase superficial velocities and pulse velocities. The influence of continuous phase axial dispersion was much greater than the influence of drop size variation, and was not accurately predicted by most previous tracer-based correlations. An inlet dispersed phase distributor was beneficial to the performance with the high interfacial tension system.