| 超高强度钢材焊接截面残余应力分布研究 |
| |
| 引用本文： | 班慧勇,施刚,石永久,王元清.超高强度钢材焊接截面残余应力分布研究[J].工程力学,2008,25(Z2). |
| |
| 作者姓名： | 班慧勇 施刚 石永久 王元清 |
| |
| 作者单位： | 清华大学土木工程系清华大学结构工程与振动教育部重点实验室; |
| |
| 基金项目： | 国家自然科学基金项目(50708051);;“十一五”国家科技支撑计划重点项目(2006BAJ03A02-1) |
| |
| 摘 要： | 超高强度钢材(屈服强度≥460MPa)已经在多个钢结构实际工程中得到应用,但关于其构件截面残余应力以及轴心受压整体稳定性的研究还很少。该文总结了国外已有的超高强度钢材焊接截面残余应力的试验测量结果,针对工字形、箱形和十字形三种焊接截面,分析了截面残余压应力与板件宽厚比的关系,并提出了这三种焊接截面超高强度钢材构件残余应力的分布模型和具体计算公式,为研究超高强度钢材受压构件的整体和局部稳定受力特性提供了前提条件。
|
| 关 键 词： | 钢结构 超高强度钢材 残余应力 分布模型 宽厚比 |
STUDY ON THE RESIDUAL STRESS DISTRIBUTION OF ULTRA.HIGH-STRENGTH-STEEL WELDED SECTIONS |
| |
| BAN Hui-yong,SHI Gang,SHI Yong-jiu,WANG Yuan-qing.STUDY ON THE RESIDUAL STRESS DISTRIBUTION OF ULTRA.HIGH-STRENGTH-STEEL WELDED SECTIONS[J].Engineering Mechanics,2008,25(Z2). |
| |
| Authors: | BAN Hui-yong SHI Gang SHI Yong-jiu WANG Yuan-qing |
| |
| Affiliation: | Key Laboratory of Structural Engineering and Vibration of China Education Ministry;Department of Civil Engineering;Tsinghua University;Beijing 10084;China |
| |
| Abstract: | Ultra-high strength steels with nominal yield strength more than 460 MPa have begun to be applied to the construction of many steel structures, but there is short of sound research on the residual stress distributions and the buckling behavior of ultra-high-strength-steel welded section columns. Many available test results of residual stresses of abroad ultra-high-strength-steel welded sections including I shaped, box-like and cruciform sections, have been thusly reviewed, analyzed and compared. The relatio... |
| |
| Keywords: | steel structure ultra-high-strength-steel residual stress distribution model plate slenderness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
