| 两步法制备多孔钛酸铝陶瓷 |
| |
| 引用本文： | 冯厚坤,张长森,于方丽,冯桢哲,张建利.两步法制备多孔钛酸铝陶瓷[J].材料科学与工程学报,2017,35(3). |
| |
| 作者姓名： | 冯厚坤 张长森 于方丽 冯桢哲 张建利 |
| |
| 作者单位： | 1. 盐城工学院材料工程学院,江苏盐城224051;江苏大学材料科学与工程学院,江苏镇江212000;2. 盐城工学院材料工程学院,江苏盐城,224051;3. 盐城工学院材料工程学院,江苏盐城224051;常州大学材料科学与工程学院,江苏常州 213164 |
| |
| 基金项目： | 江苏省生态建材与环保装备协同创新中心和江苏省新型环保重点实验室联合资助项目 |
| |
| 摘 要： | 以溶胶-凝胶法与固相反应法制备的Al_2TiO_5粉体为主要原料,采用淀粉为造孔剂,制备多孔钛酸铝陶瓷。研究了Al_2TiO_5粉体及添加剂对多孔陶瓷的抗折强度、显气孔率、物相组成和显微结构等的影响。结果表明,添加5%MgO和10%SiO_2制备的多孔钛酸铝陶瓷的抗折强度为22.68MPa,显气孔率为35.18%;加入复合添加剂比单一添加剂更有效地抑制Al_2TiO_5的高温分解,提高陶瓷的抗折强度。
|
| 关 键 词： | 溶胶-凝胶法 固相反应法 钛酸铝 添加剂 多孔陶瓷 |
Porous Aluminum Titanate Ceramics Prepared by Two-step Method |
| |
| FENG Houkun,ZHANG Changsen,YU Fangli,FENG Zhenzhe,ZHANG Jianli.Porous Aluminum Titanate Ceramics Prepared by Two-step Method[J].Journal of Materials Science and Engineering,2017,35(3). |
| |
| Authors: | FENG Houkun ZHANG Changsen YU Fangli FENG Zhenzhe ZHANG Jianli |
| |
| Abstract: | Porous aluminum titanate ceramic was prepared by using starch as pore forming agent and Al2TiO5 powder as the main raw material.The Al2TiO5 powder was synthesized before hand by sol-gel method and solid-state reaction me.The effects of Al2TiOs powder and additives on the bending strength,apparent porosity,phase composition and microstructure of the porous ceramics were studied.The results show that with 5％ MgO and 10％ SiO2 added,the apparent porosity of the porous ceramics is 35.18％ and bending strength 22.68MPa.The addition of compound additives could more effectively inhibit the decomposition of Al2TiO5 at high temperature and improve the bending strength of the ceramics than the addition of single. |
| |
| Keywords: | sol-gel method solid-state reaction method aluminum titanate additives porous ceramics |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
