首页 | 官方网站   微博 | 高级检索  
     

单分散纳米氧化铟锡粉末的水热合成
引用本文:朱归胜,徐华蕊,廖春图.单分散纳米氧化铟锡粉末的水热合成[J].无机材料学报,2005,20(2):479-483.
作者姓名:朱归胜  徐华蕊  廖春图
作者单位:1, 桂林电子工业学院, 桂林 541004; 2. 柳州华锡集团有限责任公司, 柳州 545006
基金项目:国家863计划(2003AA32X140)
摘    要:以金属铟和锡为原料,于碱性环境240℃水热合成12h并经500℃煅烧2h得到了 粒径为70±10nm,比表面积为11 m2/g的高纯氧化铟锡(ITO)粉末.由SEM、激光粒度测试 仪和BET三种方法分析得到的粉末平均粒径相吻合,证明制备的粉末是单分散状态的.研究 还发现,提高铟锡初始浓度和氢氧化钠过量浓度均有利于小粒径单分散ITO粉末的制备,但 过高的氢氧化钠过量浓度会使粉末出现团聚.

关 键 词:氧化铟锡(ITO)  纳米粉末  水热  单分散  
文章编号:1000-324X(2005)02-0479-05
收稿时间:2004-3-17
修稿时间:2004-5-10

Monodispersed Tin Doped Indium Oxide Nanometer Powders Prepared by Hydrothermal Method
ZHU Gui-Sheng,XU Hua-Rui,LIAO Chun-Tu.Monodispersed Tin Doped Indium Oxide Nanometer Powders Prepared by Hydrothermal Method[J].Journal of Inorganic Materials,2005,20(2):479-483.
Authors:ZHU Gui-Sheng  XU Hua-Rui  LIAO Chun-Tu
Affiliation:1.Guilin University of Electronic Technology; Guilin 541004; China; 2.Liuzhou China-tin Group Company Ltd.; Liuzhou 545006; China
Abstract:Monodispersed tin doped indium oxide (ITO) powders with 70±10nm particle size and 11 m2/g special surface area were prepared by a hydrothermal process at 240℃ for 12h, and calcination process at 500℃ for 2h, by using indium and tin metals as raw materials. X-ray diffractometry, scanning electron microscopy, Brunauer-Emmett-Teller analysis confirm that the as-prepared powder is monodispersed and increasing the NaOH excess concentration (from 0 to 2.0mol/L) and the initial indium and tin concentration (from 0.25mol/L to 1mol/L) is benificial to preparing monodispersed ITO powders with small particle sizes.
Keywords:doped indium oxide  nanometer powder  hydrothermal  monodispersed  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《无机材料学报》浏览原始摘要信息
点击此处可从《无机材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号