| 高光无痕注塑成型模具热响应的研究 |
| |
| 引用本文： | 林晨,;陈忠家,;蒙广建,;李琳,;韩永志.高光无痕注塑成型模具热响应的研究[J].上海塑料,2014(2):17-21. |
| |
| 作者姓名： | 林晨 ;陈忠家 ;蒙广建 ;李琳 ;韩永志 |
| |
| 作者单位： | [1]合肥工业大学材料学院,安徽合肥230009; [2]安徽江淮汽车股份有限公司技术中心,安徽合肥230601 |
| |
| 摘 要： | 高光无痕注射成型技术是一种新开发的注射技术,能够消除塑件表面熔接痕等缺陷,表面可以达到镜面效果,免去二次喷涂。通过建立模具的二维几何模型,应用ANSYS模拟了加热、冷却过程,获得了模具表面及熔体中心层的热响应和温度分布情况;对比分析了常规注塑与高光无痕注塑两种成型工艺;通过加热、冷却时间及温度分布等对比,验证了高光无痕注塑的优越性。
|
| 关 键 词： | 高光无痕注塑 热响应规律 模具结构 |
Analysis of Thermal Response of Mold in Rapid Heat Cycle Molding |
| |
| LIN Chen;CHEN Zhong-jia;MENG Guang-jian;LI Lin;HAN Yong-zhi.Analysis of Thermal Response of Mold in Rapid Heat Cycle Molding[J].Shanghai Plastics,2014(2):17-21. |
| |
| Authors: | LIN Chen;CHEN Zhong-jia;MENG Guang-jian;LI Lin;HAN Yong-zhi |
| |
| Affiliation: | LIN Chen , CHEN Zhong-jia , MENG Guang-jian , LI Lin , HAN Yong-zhi (1. School of Materials Science and Engineering, Hefei University of Technology, Hefei 9,30009, China; 2. Anhui Jianghuai Automobile Co. , Ltd. , Technology Center, Hefei 230601, China) |
| |
| Abstract: | Rapid heat cycle molding is an emerging injection technology, which can eliminate sur- face defects such as weld lines, and then get a mirror effect without the secondary spray. A 2D geometric model of the mold is established in ANSYS. The thermal response and temperature distribution both at the mold surface and the melt eentral layer can be obtained through simula- ting the steam-assisted heating and cooling processes using this model. Compared with conven- tional injection molding, heating time, cooling time and temperature distribution are taken into account. The investigation shows that the rapid heat cycle molding is better than conventional injection molding. |
| |
| Keywords: | rapid heat cycle molding law of thermal response mold structure |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
