| 非轴对称处理机匣的周向处理范围的实验 |
| |
| 引用本文： | 刘建勇,袁巍,陆亚钧.非轴对称处理机匣的周向处理范围的实验[J].航空动力学报,2009,24(6):1385-1388. |
| |
| 作者姓名： | 刘建勇 袁巍 陆亚钧 |
| |
| 作者单位： | 北京航空航天大学,能源与动力工程学院,航空发动机气动热力重点实验室,北京,100191 |
| |
| 基金项目： | 国家自然科学基金(50476003);;北京航空航天大学博士生创新基金 |
| |
| 摘 要： | 为了解决传统处理机匣对压气机"扩稳降效"的现象,打破处理机匣结构的轴对称传统,并设计了5种不同周向分布范围的非轴对称处理机匣.实验结果显示压气机的稳定裕度随非轴对称处理机匣的周向处理槽数的增多而单调增加,而效率则随处理槽数的增多先增加后减小.当非轴对称处理机匣的周向处理范围为120°时,能使压气机的稳定裕度和效率均有所增加,起到"扩稳增效"的效果.初步分析其原因是非轴对称的机匣结构改变了压气机叶尖的非定常流动.
|
| 关 键 词： | 轴流压气机 处理机匣 非轴对称 非定常流动 |
| 收稿时间： | 6/13/2008 1:42:00 PM |
| 修稿时间： | 8/17/2008 4:39:34 PM |
Experimental investigation about the circumferential treating angle of non-axisymmetric casing treatments |
| |
| LIU Jian-yong,YUAN Wei and LU Ya-jun.Experimental investigation about the circumferential treating angle of non-axisymmetric casing treatments[J].Journal of Aerospace Power,2009,24(6):1385-1388. |
| |
| Authors: | LIU Jian-yong YUAN Wei and LU Ya-jun |
| |
| Affiliation: | National Key Lab on Aero-Engine;School of Jet PropulsionBeijing University of Aeronautics and Astronautics;Beijing 100191;China |
| |
| Abstract: | In order to solve the problem that traditional casing treatment increases the stall margin while reducing the efficiency of compressor,five innovative non-axisymmetric casing treatments with different circumferential treating angles were designed in this paper.In a series of experiments,the stall margin of a compressor increased with the rise of circumferential treating angle,while the isentropic efficiency rose up firstly and fell down later.It was interesting that the stall margin and efficiency of the co... |
| |
| Keywords: | axial compressor casing treatment non-axisymmetric unsteady flow |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
