首页 | 官方网站   微博 | 高级检索  
     

钢材表面硅烷处理后的防蚀性能
引用本文:陈珊,陈仁霖,陈学群,李国明.钢材表面硅烷处理后的防蚀性能[J].腐蚀与防护,2008,29(4):175-177.
作者姓名:陈珊  陈仁霖  陈学群  李国明
作者单位:1. 海军工程大学化学与材料系,武汉,430033
2. 马鞍山钢铁集团公司,马鞍山,243003
基金项目:海军工程大学校科研和教改项目
摘    要:采用硫酸铜点滴、线性极化、电化学阻抗等试验,对比研究了经硅烷偶联剂(SCA)和铬酸盐表面处理后的冷轧板的耐蚀性。结果表明经硅烷偶联剂表面处理后不但提高了基材的耐蚀性能,还提高了基材与涂层结合力,起到和铬酸盐钝化相同的防护效果。该方法有望取代造成环境污染的铬酸盐钝化工艺。

关 键 词:耐蚀性  硅烷偶联剂  铬酸盐  电化学阻抗  线性极化
文章编号:1005-748X(2008)04-0175-03
修稿时间:2007年3月28日

Corrosion Resistance of Steels after Silane Coupling Agent Treatment
CHEN Shan,CHEN Ren-lin,CHEN Xue-qun,LI Guo-ming.Corrosion Resistance of Steels after Silane Coupling Agent Treatment[J].Corrosion & Protection,2008,29(4):175-177.
Authors:CHEN Shan  CHEN Ren-lin  CHEN Xue-qun  LI Guo-ming
Abstract:The corrosion-resistance of the cold rolled steels treated with silane coupling agent(SCA) and chromate was studied by the tests of CuSO4 dropping,linear polarization and EIS etc.The results showed that the corrosion resistance of the steels and the adhesion between the steel and the coating were enhanced by the SCA surface treatment.The corrosion protection performance of silane treatment is comparable to that of chromate treatment,The conventional chromate could be replaced by the SCA treatment.
Keywords:corrosion resistance  silane coupling agent(SCA)  chromate  EIS  linear polarization
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号