首页 | 官方网站   微博 | 高级检索  
     

Sialon,Al2O3和SiC自配对干摩擦研究
引用本文:赵明,黄莉萍,丁传贤.Sialon,Al2O3和SiC自配对干摩擦研究[J].无机材料学报,1997,12(1):79-85.
作者姓名:赵明  黄莉萍  丁传贤
作者单位:中国科学院上海硅酸盐研究所!上海,200050,中国科学院上海硅酸盐研究所!上海,200050,中国科学院上海硅酸盐研究所!上海,200050
基金项目:国家自然科学基金,中国科学院兰州化学物理所固体润滑开放实验室资助
摘    要:本文研究了高温结构陶瓷Sialon、Al2O3、SiC的自配对滑动干摩擦磨损性能,运用SEM、TEM、XPS手段观察和分析了磨损面的表面形貌、磨屑形状及相组成,目的是揭示陶瓷材料在试验条件下的滑动干摩擦磨损规律和摩擦磨损机理,结果表明:Sialon$ 微剥离磨损,摩擦过程中产生的氧化产物能改善材料摩擦;Al2O的磨损机理是磨屑边界润滑下的晶粒拔出和沿晶断裂;SiC表现为犁沟-磨屑-犁沟过程的磨损,并

关 键 词:断裂  摩擦  氧化  结构陶瓷  高温  陶瓷
收稿时间:1996-4-18
修稿时间:1996-5-8

Tribological Behavior of Unlubricated Sliding Test with Sialon, Al2O3 and SiC
ZHAO Ming,HUANG Liping,DING Chuangxian.Tribological Behavior of Unlubricated Sliding Test with Sialon, Al2O3 and SiC[J].Journal of Inorganic Materials,1997,12(1):79-85.
Authors:ZHAO Ming  HUANG Liping  DING Chuangxian
Affiliation:ShanghaiInstituteofCeramics;ChineseAcademyofSciencesShanghai200050China
Abstract:Friction and wear behaviors were studied for Sialon, Al2O3 and SiC unlubricated sliding against themselves with block-ring apparatus at 5ON normal load and 0.9m/s sliding velocity. All materich and worn surfaces as well as debris were extensively characterized by means of SEM, TEM and XPS. The results obtained indicated that: Wear of Sialon is interpreted in terms of delamination. In the processing, the oxidation and its formation appeared. Mixed surface film of SiO2 and Al2O3 improved the wear of Sialon. Wear of Al2O3 is explained in terms of the grain fracture. Wear of SiC is caused by the formation of powders and loose wear debris which was due to the oxidation of SiC.
Keywords:brittle fracture  tribochemical  unlubricate
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《无机材料学报》浏览原始摘要信息
点击此处可从《无机材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号