| 成形工艺参数对薄壳塑件翘曲变形影响的数值模拟 |
| |
| 引用本文： | 朱春东,虞炜华,朱洪艳,郭巍.成形工艺参数对薄壳塑件翘曲变形影响的数值模拟[J].模具工业,2007,33(9):50-53. |
| |
| 作者姓名： | 朱春东 虞炜华 朱洪艳 郭巍 |
| |
| 作者单位： | 武汉理工大学,材料学院,湖北,武汉,430070 |
| |
| 摘 要： | 利用Moldflow分析软件对薄壳塑件成型过程进行模拟,获得了不同注射工艺参数下薄壳塑件翘曲变形量,比较了不同工艺参数对翘曲变形量的影响,通过正交试验得到了优化的工艺参数组合,为注射工艺分析和模具设计提供了依据。
|
| 关 键 词： | 薄壳塑件 注射成型 工艺参数 翘曲变形 |
| 文章编号： | 1001-2168（2007）09-0050-04 |
| 修稿时间： | 2007-04-23 |
Numerical simulation on the effect of technological parameters on the warpage of plastic thinshelled component |
| |
| ZHU Chun-dong,YU Wei-hua,ZHU Hong-yan,GUO Wei.Numerical simulation on the effect of technological parameters on the warpage of plastic thinshelled component[J].Die & Mould Industry,2007,33(9):50-53. |
| |
| Authors: | ZHU Chun-dong YU Wei-hua ZHU Hong-yan GUO Wei |
| |
| Affiliation: | School of Materials Science and Engineering,Wuhan University of Technology,Wuhan,Hubei 430070,China |
| |
| Abstract: | Using analysis software Moldflow to simulate the forming process of a plastic thinshelled component.The amount of warpage in the forming of the thinshelled part under different injection technological parameters was obtained.The effects of different technological parameters on the amount of warpage were compared,and then an optimized parameter combination was achieved by using orthogonal experimental method. |
| |
| Keywords: | plastic thinshelled component injection molding technological parameter warpage |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
