|
|||||
|
|
| 高速线材减定径轧制变形特点与热模拟参数研究 | |
| 引用本文： | 曹杰,刘雅政,阎军,章静.高速线材减定径轧制变形特点与热模拟参数研究[J].重型机械,2010(1):11-14. |
| 作者姓名： | 曹杰 刘雅政 阎军 章静 |
| 作者单位： | 1. 北京科技大学材料科学与工程学院,北京,100083;安徽工业大学材料科学与工程学院,安徽,马鞍山,243002 2. 北京科技大学材料科学与工程学院,北京,100083 3. 安徽工业大学材料科学与工程学院,安徽,马鞍山,243002 |
| 基金项目： | 科技部支撑计划项目"高效节约型建筑用钢产品开发及应用研究" |
| 摘 要： | 为分析高速线材减定径轧制的变形特点,利用有限元模拟方法研究了四道次减定径轧制过程。轧制产品规格为φ12 mm的圆钢,孔型系统为椭圆-圆-椭圆-圆。研究表明,四道次减定径轧制轧件最大累积等效塑性应变达1.890,最大温升达76.7℃,轧件平均变形速度大于429.4 s-1。限于热模拟条件的限制,仅能对减定径轧制轧件的变形程度进行准确模拟。 |
| 关 键 词： | 减定径轧制 变形 有限元法 热模拟参数 |
Research on deformation characteristics and thermal simulation parameters of reducing and sizing rolling of high-speed wire rods |
|
| CAO Jie,LIU Ya-zheng,YAN Jun,ZHANG Jing.Research on deformation characteristics and thermal simulation parameters of reducing and sizing rolling of high-speed wire rods[J].Heavy Machinery,2010(1):11-14. | |
| Authors: | CAO Jie LIU Ya-zheng YAN Jun ZHANG Jing |
| Affiliation: | CAO Jie1,2,LIU Ya-zheng1,YAN Jun2,ZHANG Jing2(1.School of Materials Science , Engineering,University of Science , Technology Beijing,Beijing 100083,China,2.School of Materials Science ,Engineering,Anhui University of Technology,Ma\'anshan 243002,China) |
| Abstract: | In order to analyze the deformation characteristics of the reducing and sizing rolling of high-speed wire rods, 4-pass reducing and sizing rolling process has been studied by means of FEM simulation. The product is Ф12 mm round steel, with the pass system being oval-round-oval-round. Research showed that the maximum accumulated equivalent plastic strain of the 4-pass reducing and sizing rolling piece reached 1. 890, the maximum total temperature rise was up to 76. 7℃, and the average strain rate was greater than 429.4 s^-1. Confined by the ability of the thermal simulator, only deformation degree could be simulated accurately. |
| Keywords: | reducing and sizing rolling deformation FEM thermal simulation parameters |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
