首页 | 官方网站   微博 | 高级检索  
     

纳米SiO2/苯丙无皂复合乳液表面施胶剂的原位聚合法制备及应用研究
引用本文:张恒,刘丽丽,张岩冲.纳米SiO2/苯丙无皂复合乳液表面施胶剂的原位聚合法制备及应用研究[J].造纸科学与技术,2012(2):41-45.
作者姓名:张恒  刘丽丽  张岩冲
作者单位:青岛科技大学化工学院
摘    要:采用原位聚合法制备了具有核壳结构的纳米二氧化硅/苯丙无皂复合乳液表面施胶剂。对乳液聚合的工艺参数进行了实验研究,得到最佳反应条件为乳化剂用量6%,硅溶胶用量1%,反应温度75℃,反应时间3 h。通过红外光谱(IR)及粒径分析测试对复合乳液进行表征,结果表明纳米SiO2和苯丙单体之间存在化学键联。在此条件下可制得稳定、转化率达98%的硅溶胶/苯丙无皂复合乳液,用作表面施胶剂,涂布后的纸页Cobb60值为11.08,光泽度为26.3。

关 键 词:原位聚合  纳米二氧化硅  表面施胶剂  苯丙乳液  反应型乳化剂

Preparation and Application of Nano SiO2/Styrene-acrylic Soap-free Emulsion by In-situ Polymerization
Zhang Heng Liu Li-li Zhang Yan-chong.Preparation and Application of Nano SiO2/Styrene-acrylic Soap-free Emulsion by In-situ Polymerization[J].Paper Science & Technology,2012(2):41-45.
Authors:Zhang Heng Liu Li-li Zhang Yan-chong
Affiliation:Zhang Heng Liu Li-li Zhang Yan-chong (College of Chemical Engineering,Qingdao University of Science and Technology,Qingdao 266042,Shandong,China)
Abstract:The synthesis of nano SiO2/ styrene-acrylic soap-free emulsion with core-shell structure by in-situ polymerization method was researched in this paper.The optimum conditions for emulsion polymerization were obtained: emulsifier dosage of 6%,silicon sol dosage of 3%,reaction temperature of 75℃,and reaction time of 3h.stable and high conversion of 98% styrene-acrylic emulsion was prepared on these conditions.The composite emulsion was characterized by fourier transform infrared(FT-IR) and observed by means of the particle size analysis.The results indicated that there were chemical bonds between SiO2 and styrene-acrylic.Paper coated by this emulsion on the surface obtains good properties,which Cobb60 is 11.08 and gloss is 26.3.
Keywords:in-situ polymerization  nano SiO2  surface sizing agent  styrene-acrylic emulsion  reactive emulsifier
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号