| 航空发动机叶片精锻成形过程的热力耦合数值模拟 |
| |
| 引用本文： | 齐广霞,邓华红,庞红.航空发动机叶片精锻成形过程的热力耦合数值模拟[J].沈阳理工大学学报,2009,28(4). |
| |
| 作者姓名： | 齐广霞 邓华红 庞红 |
| |
| 作者单位： | 1. 沈阳理工大学,材料科学与工程学院,辽宁,沈阳,110168
2. 奥托立夫(上海)汽车安全系统研发有限公司,上海,201807 |
| |
| 摘 要： | 采用热力耦合数值模拟方法对高温合金IN718单榫头叶片精锻成形工艺过程进行了模拟研究.研究结果表明:在叶片成形过程中塑性变形功和摩擦功所带来的升温效应和坯料与模具之间的热传递所引起的冷却效应对温度场、等效应力场以及载荷一时间曲线的影响较大;不同摩擦系数对叶片精锻过程的影响也比较明显;成功解决了叶身和榫头交界处出现的缩颈问题;通过模拟结果对比分析,进一步验证了本模拟过程分析的合理性和实用性.
|
| 关 键 词： | 叶片 精锻 热力耦合 数值模拟 |
The Coupled Thermo-mechanical Simulation on Precision Forging Process of Blade fo Aerogengine |
| |
| QI Guang-xia,DENG Hua-hong,PANG Hong.The Coupled Thermo-mechanical Simulation on Precision Forging Process of Blade fo Aerogengine[J].Transactions of Shenyang Ligong University,2009,28(4). |
| |
| Authors: | QI Guang-xia DENG Hua-hong PANG Hong |
| |
| Abstract: | Precision forging process of blade is simulated by the coupled thermo-mechanical method.The research results indicate that there are two factors affecting temperature field and equivalent stress field and load-time curve in the process of blade forging.One is heating-up effect of plastic deformation work and friction work,and the other is cooling effect of heat transfer between billet and die.It was analyzed the influence of friction coefficient on precision forging process of blade under different conditio... |
| |
| Keywords: | blade precision forging coupled thermo-mechanical numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
