| 数控快速点磨削技术及其应用研究 |
| |
| 引用本文： | 修世超,蔡光起,巩亚东,李长河.数控快速点磨削技术及其应用研究[J].中国机械工程,2005,16(23):2086-2089. |
| |
| 作者姓名： | 修世超 蔡光起 巩亚东 李长河 |
| |
| 作者单位： | 东北大学,沈阳,110004 |
| |
| 基金项目： | 教育部科学技术研究重点项目(104190) |
| |
| 摘 要： | 介绍了快速点磨削技术的发展现状及工艺特征,分析和研究了快速点磨削机理和材料去除机制。研究结果表明,砂轮的磨损机制不同于一般外圆磨削,磨削过程具有较高的绿色加工性能,通过合理控制磨削参数和磨削条件,该项技术可应用于一些难加工材料和复杂回转表面的高质量磨削加工。由此提出了在这些领域开展应用研究的重点内容,以及推广和开发此项技术的意义。
|
| 关 键 词： | 快速点磨削 超高速磨削 难加工材料 CBN |
| 文章编号： | 1004-132X（2005）23-2086-04 |
| 收稿时间： | 2004-12-07 |
| 修稿时间： | 2004-12-07 |
Study on Applications and Technology of Quick-point Grinding |
| |
| Xiu Shichao,Cai Guangqi,Gong Yadong,Li Changhe.Study on Applications and Technology of Quick-point Grinding[J].China Mechanical Engineering,2005,16(23):2086-2089. |
| |
| Authors: | Xiu Shichao Cai Guangqi Gong Yadong Li Changhe |
| |
| Affiliation: | Northeastern University, Shenyang, 110004 |
| |
| Abstract: | The development and the process principle of quick-point grinding were introduced.From the study of quick-point grinding mechanism,it is shown that wear mechanism of the grinding wheel is different from conventional cylindrical grinding,and it can be used to grind some difficult-to-grinding materials and complex round surface with high working quality and green degree under proper grinding conditions.Therefore,the main research issues in the field of quick-point grinding and its importance were presented. |
| |
| Keywords: | quick-point grinding ultra-high speed grinding difficult-to-grinding material CBN |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
