| 硅胶负载型茂金属催化剂催化乙烯聚合效率研究 |
| |
| 引用本文： | 王雄,张鹏,刘文霞,姚培洪.硅胶负载型茂金属催化剂催化乙烯聚合效率研究[J].石化技术与应用,2011,29(4):337-339,345. |
| |
| 作者姓名： | 王雄 张鹏 刘文霞 姚培洪 |
| |
| 作者单位： | 中国石油兰州化工研究中心,甘肃,兰州,730060 |
| |
| 摘 要： | 研究了影响硅胶负载型茂金属催化剂(双(1-丁基-3-甲基环异戊二烯基)二氯化锆/甲基铝氧烷)催化乙烯聚合效率的因素,讨论了硅胶颗粒的比表面积、负载温度、铝及锆的负载量对催化效率的影响。结果表明,硅胶的比表面积增大时催化效率提高;负载温度为-20℃,负载锆质量分数约为0.5%,负载铝质量分数约为17%时,负载型茂金属催化剂催化乙烯聚合的催化效率达到最佳状态。
|
| 关 键 词： | 茂金属催化剂 聚乙烯 硅胶 催化效率 负载催化剂 |
Study on effieiency of silica gel-supported metallocene catalyst in ethylene polymerization |
| |
| Wang Xiong,Zhang Peng,Liu Wenxia,Yao Peihong.Study on effieiency of silica gel-supported metallocene catalyst in ethylene polymerization[J].Petrochemical Technology & Application,2011,29(4):337-339,345. |
| |
| Authors: | Wang Xiong Zhang Peng Liu Wenxia Yao Peihong |
| |
| Affiliation: | Wang Xiong,Zhang Peng,Liu Wenxia,Yao Peihong(Lanzhou Petrochemical Research Center,PetroChina,Lanzhou 730060,China) |
| |
| Abstract: | The factors of influencing catalyst efficiency of silica gel-supported metallocene catalyst of(1-Bu-3-MeCp)2ZrCl2/methylaluminoxane(MAO) was studied.The effects of SiO2 average specific area,supporting temperature,the supporting level of MAO and(1-Bu-3-MeCp)2ZrCl2 on catalyst efficiency were discussed.The results showed that catalyst efficiency increased as the specific surface area of SiO2 increased,and that optimal catalytic efficiency was obtained at about 0.5% of Zr mass fraction and 17% of Al mass frac... |
| |
| Keywords: | metallocene catalyst polyethylene silica gel catalytic efficiency supported catalyst |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
