| 基于FPGA的电阻抗成像系统激励信号源 |
| |
| 引用本文： | 王化祥, 崔自强,.基于FPGA的电阻抗成像系统激励信号源[J].电子器件,2007,30(1):90-92,96. |
| |
| 作者姓名： | 王化祥 崔自强 |
| |
| 作者单位： | 天津大学自动化学院,天津,300072 |
| |
| 基金项目： | 国家自然科学基金
,
国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 针对人体电阻抗成像系统的要求,设计并实现了一种基于FPGA的激励信号源,输出频率范围为0～1.5 MHz.通过对正弦波进行泰勒级数插值,使信号源的精度得到改进;其频率、相角及幅值可调;不需改动外部电路,即可工作在单频、多频和扫频模式下.实验结果表明,该信号源精度高,幅值稳定性好,调节方便,可满足不同激励模式下人体电阻抗成像系统的需要.
|
| 关 键 词： | 电阻抗断层成像 泰勒级数插值 信号源 FPGA |
| 文章编号： | 1005-9490（2007）01-0090-03 |
| 修稿时间： | 2006-02-13 |
FPGA Based Signal Generator in EIT System |
| |
| WANG Hua-xiang,CUI Zi-qiang.FPGA Based Signal Generator in EIT System[J].Journal of Electron Devices,2007,30(1):90-92,96. |
| |
| Authors: | WANG Hua-xiang CUI Zi-qiang |
| |
| Affiliation: | School of Automation, Tianjin University, Tianjin 300072 China |
| |
| Abstract: | A FPGA based signal generator is designed and implemented. The frequency covers from 0 to 1.5 MHa The precision of the signal generator is improved significantly with Taylor series corrected method. The frequency, phase and amplitude of the signal source can be controlled. Moreover, single frequency, multi-frequency and sweep frequency signals can also be generated without modifying external hardware_. Experimental results show that this signal generator is of high precision and stability, and is an ideal module for electrical impedance tomography system of different exciting modes. |
| |
| Keywords: | electrical impedance tomography Taylor corrected series signal generator FPGA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《电子器件》浏览原始摘要信息 |
|
点击此处可从《电子器件》下载全文 |
|
