Minimizing power dissipation in optical interconnects at low voltage using optimal modulator design

A strong motivation for insertion of optical interconnects in short-distance applications such as chip-to-chip or back-plane communication, apart from high bit rates, is their potential to achieve these bit rates at low power compared to the currently prevalent copper based interconnects. Thus, it is imperative to construct design methodologies which minimize the total optical link power dissipation. We present one such methodology, where we optimize the quantum-well modulators to minimize the power dissipation in modulator-based optical interconnects. In the first part of the paper, the focus is on obtaining the optimal modulator metrics contrast ration (CR) and insertion loss], which yield the lowest total power (receiver and the modulator). The trends are studied as a function of the input laser power and bit rate. Having obtained the desirable modulator metrics and the corresponding power dissipation, in the second part, the focus is on the feasibility of these metrics in the light of voltage swing constraints. The biggest concern with the modulator based optical link is the low CR, especially at low voltage swing. While studying these concerns, we also provide insight into the physical design of the modulator including, its intrinsic region thickness, pre-bias voltage, and the size and the number of quantum-wells. Specifically, we outline the method to obtain the design parameters, which allows minimum power dissipation with the least laser power. This ultimately yields higher aggregate I/O bandwidth for chip to chip communication in power limited chips.