| 固相缩聚工艺与PET熔融行为的研究 |
| |
| 引用本文： | 胡群华,王建丰,肖维箴,成展,邱高,沈希军,张忠安,季平,王金堂,严治仁,许毓敏.固相缩聚工艺与PET熔融行为的研究[J].高分子材料科学与工程,2005,21(3):235-238. |
| |
| 作者姓名： | 胡群华 王建丰 肖维箴 成展 邱高 沈希军 张忠安 季平 王金堂 严治仁 许毓敏 |
| |
| 作者单位： | 东华大学理学院,上海,200051;仪征化纤股份有限公司,江苏,仪征,211900 |
| |
| 基金项目： | 国家自然科学基金资助课题(20276013) |
| |
| 摘 要： | 应用差示扫描量热法较深入地研究了固相缩聚工艺流程对PET熔融行为的影响。结果说明．低温干燥结晶、后结晶PET切片在高温预热处理过程中，发生固相缩聚使分子量提高的同时。结晶结构重整,熔点提高，结晶度增大。预热工艺过程使PET起始熔点提高。从而能有效防止切片在固相缩聚主反应器中的粘结。
|
| 关 键 词： | 聚对苯二甲酸乙二醇酯 固相缩聚 熔融行为 差示扫描量热法 |
| 文章编号： | 1000-7555(2005)03-0235-04 |
| 修稿时间： | 2003年10月17 |
MELTING BEHAVIOR OF PET AFTER SOLID STATE POLYCONDENSATION PROCESS |
| |
| HU Qun-hua,WANG Jian-feng,XIAO Wei-zhen,CHENG Zhan,QIU Gao,SHENG Xi-jun,ZHANG Zhong-an,JI Ping,WANG Jin-tang,YAN Zhi-ren,XU Yu-ming.MELTING BEHAVIOR OF PET AFTER SOLID STATE POLYCONDENSATION PROCESS[J].Polymer Materials Science & Engineering,2005,21(3):235-238. |
| |
| Authors: | HU Qun-hua WANG Jian-feng XIAO Wei-zhen CHENG Zhan QIU Gao SHENG Xi-jun ZHANG Zhong-an JI Ping WANG Jin-tang YAN Zhi-ren XU Yu-ming |
| |
| Affiliation: | HU Qun-hua~1,WANG Jian-feng~1,XIAO Wei-zhen~2,CHENG Zhan~2,QIU Gao~1,SHENG Xi-jun~2,ZHANG Zhong-an~2,JI Ping~2,WANG Jin-tang~2,YAN Zhi-ren~1,XU Yu-ming~1 |
| |
| Abstract: | The effect of solid-state polycondensation (SSP) process on the melting behavior of PET was studied by Differential Scanning Calorimetric (DSC) measurement. The dried and crystallized PET undergoes virtually a prolonged annealing treatment during preheat at higher temperature, which results in SSP reaction to increase molecular weight and structure perfection of initial crystals. Consequently, the preheat treatment in industrial SSP process is able to increase the onset melting temperature, as well as sticking point of PET pellets. |
| |
| Keywords: | PET solid state polycondensation melting behavior DSC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
