| 双轴加载下缺口疲劳裂纹萌生位置的研究 |
| |
| 引用本文： | 王英玉,姚卫星.双轴加载下缺口疲劳裂纹萌生位置的研究[J].机械强度,2004,26(Z1):12-14. |
| |
| 作者姓名： | 王英玉 姚卫星 |
| |
| 作者单位： | 南京航空航天大学,航空宇航学院飞行器系,南京,210016 |
| |
| 基金项目： | 本文获得博士点基金(20020287022)、南京航空航天大学博士学位论文创新与创优基金(4003-019001）. |
| |
| 摘 要： | 对航空材料LY12CZ进行多种比例和非比例加载试验.分别采用弹性力学方法及弹塑性有限元方法对多轴加载下缺口试件缺口孔边应力应变进行分析,探讨疲劳裂纹萌生位置与孔边应力、应变的关系.试验与分析结果对照表明,各试验载荷情况下最大剪应力幅及最大剪应变幅的分布与孔边疲劳裂纹分布符合最好.
|
| 关 键 词： | 多轴疲劳 比例加载 非比例加载 裂纹萌生 破坏准则 有限元法 |
| 修稿时间： | 2004年4月25日 |
STUDY ON FATIGUE CRACK INITIATION SITE OF NOTCHED TUBULAR SPECIMEN UNDER BIAXIAL LOADING |
| |
| WANG YingYu,YAO WeiXing.STUDY ON FATIGUE CRACK INITIATION SITE OF NOTCHED TUBULAR SPECIMEN UNDER BIAXIAL LOADING[J].Journal of Mechanical Strength,2004,26(Z1):12-14. |
| |
| Authors: | WANG YingYu YAO WeiXing |
| |
| Abstract: | Various proportional and nonproportional tension-torsion fatigue tests were conducted on aeronautic material, LY12CZ. The stress and strain tensors on the edge of the notch were analyzed by elasticity mechanics method and elasto-plastic finite element method, respectively. Relations between the site of crack initiation and each stress and strain tensor were investigated. The comparison between experimental and analytical results shows that the distributions of relative amplitude of the maximum shear stress and strain are consistent with that of the fatigue cracks under all tested loading cases. |
| |
| Keywords: | Multiaxial fatigue Proportional loading Nonproportional loading Crack initiation Fatigue criteria Finite element method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
