首页 | 官方网站   微博 | 高级检索  
     

联合布置采区集中下山保护煤柱留设尺寸研究
引用本文:殷伟,昝东峰,聂守江.联合布置采区集中下山保护煤柱留设尺寸研究[J].中国煤炭,2012,38(1):45-48.
作者姓名:殷伟  昝东峰  聂守江
作者单位:中国矿业大学矿业工程学院 江苏省徐州市 221116;煤炭资源与安全开采国家重点实验室 江苏省徐州市 221008
基金项目:国家自然科学基金项目(51074165);国家自然科学基金重点项目(50834004)
摘    要:为确定翟镇煤矿三采区集中下山巷道合理保护煤柱宽度,采用理论分析、UDEC计算机数值模拟的方法,分析了1401E工作面超前支承压力的分布规律,模拟了集中下山巷道在不同宽度保护煤柱条件下受采动影响的应力应变情况。最终确定合理的集中下山巷道保护煤柱宽度为20m,并且取得了良好的工程应用效果。

关 键 词:采区下山  保护煤柱宽度  数值模拟

The coal pillar dimensions of the gathering dip in a joint disposed district
Yin Wei , Zan Dongfeng , Nie Shoujiang.The coal pillar dimensions of the gathering dip in a joint disposed district[J].China Coal,2012,38(1):45-48.
Authors:Yin Wei  Zan Dongfeng  Nie Shoujiang
Affiliation:1,2(1.School of Mines,China University of Mining & Technology,Xuzhou,Jiangsu 221116,China; 2.State Key Laboratory of Coal Resources and Safe Mining,Xuzhou,Jiangsu 221008,China)
Abstract:To determine the optimal coal pillar width of the third district’s gathering dip in Zhaizhen coal mine,the front abutment pressure distribution of 1401E panel was analyzed theoretically,and the gathering dip’s mining induced stress and strain with different coal pillar widths were simulated by the UDEC software.The gathering dip’s optimal coal pillar width was finally determined as 20m,and it is proved to be rational in the engineering application.
Keywords:district dip  coal pillar width  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号