首页 | 官方网站   微博 | 高级检索  
     

渗透汽化-隔壁塔精馏耦合初步分离费托合成水的过程研究
引用本文:刘鑫,潘阳,刘公平,方静,李春利,李浩.渗透汽化-隔壁塔精馏耦合初步分离费托合成水的过程研究[J].化工学报,2022,73(5):2020-2030.
作者姓名:刘鑫  潘阳  刘公平  方静  李春利  李浩
作者单位:1.河北工业大学化工学院,天津 300130;2.南京工业大学化工学院,江苏 南京 211816
基金项目:国家重点研发计划项目(2017YFB0602500);;国家自然科学基金项目(21808047);
摘    要:费托合成水中含有醇、酮、酸等多种高附加值含氧有机物可提取出来作为高附加值产品,但由于费托合成水处量大,共沸体系复杂,通常需要首先对其进行初步分离。设计了直接两塔精馏、渗透汽化-两塔精馏、直接隔壁塔精馏、渗透汽化-隔壁塔精馏四种可供选择的初步分离工艺。根据渗透汽化实验数据在Aspen Plus中构建渗透汽化过程模型并进行模拟,结合灵敏度分析得到精馏过程的最佳工艺参数和模拟结果,并对四种工艺的能耗和有效能损失进行对比。结果表明,渗透汽化-隔壁塔精馏工艺具有明显的节能优势,其能耗较直接两塔精馏可降低15.85%,有效能损失降低45.74%。经渗透汽化膜预浓缩后,溶液的浓度可进入隔壁塔的适宜分离浓度区间,以充分发挥隔壁塔优势。由于渗透汽化所需能量可由余热等低品位热源提供,在余热充足的煤化工领域中可显著降低有效能损失。对于该过程而言,当渗透汽化膜价格低于438元/m2时,渗透汽化-隔壁塔精馏耦合工艺将会表现出较高的经济性。

关 键 词:费托合成水  分离    渗透汽化  精馏  隔壁塔  
收稿时间:2021-12-16

Study on the process of preliminary separation of Fischer-Tropsch synthetic water by coupling pervaporation and dividing wall column distillation
LIU Xin,PAN Yang,LIU Gongping,FANG Jing,LI Chunli,LI Hao.Study on the process of preliminary separation of Fischer-Tropsch synthetic water by coupling pervaporation and dividing wall column distillation[J].Journal of Chemical Industry and Engineering(China),2022,73(5):2020-2030.
Authors:LIU Xin  PAN Yang  LIU Gongping  FANG Jing  LI Chunli  LI Hao
Affiliation:1.School of Chemical Engineering, Hebei University of Technology, Tianjin 300130, China;2.School of Chemical Engineering, Nanjing Tech University, Nanjing 211816, Jiangsu, China
Abstract:Fischer-Tropsch synthetic water contains a variety of high value-added oxygen-containing organic compounds such as alcohols, ketones, and acids. However, due to the large amount of water and the complex azeotrope system, it is usually necessary to perform preliminary separation first. In this study, four alternative preliminary separation processes, direct two-column distillation, pervaporation-two-column distillation, direct dividing wall column distillation, and pervaporation-dividing wall column distillation, were designed first. According to the pervaporation experimental data, the pervaporation process model was constructed and simulated in Aspen Plus, and the optimal process parameters and simulation results of the distillation process were obtained through sensitivity analysis. The energy consumption and effective energy loss of the four processes were compared. The results show that the pervaporation-dividing wall column distillation process has obvious energy-saving advantages. Compared with direct two-column distillation, the energy consumption could be reduced by 15.85%, and the effective energy loss could be reduced by 45.74%. After pre-concentration by the pervaporation membrane, the concentration of the solution could enter the appropriate separation concentration range of the dividing wall column, so as to give full play to the advantages of the dividing wall column. Since the energy required for pervaporation could be provided by low-grade heat sources such as waste heat, the loss of effective energy could be significantly reduced in the coal chemical industry with sufficient waste heat. For this process, when the price of pervaporation membrane is lower than 438 CNY/m2, the coupled process of pervaporation-dividing wall column distillation would show higher economy.
Keywords:Fischer-Tropsch synthetic water  separation  membranes  pervaporation  distillation  DWC  
本文献已被 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号