Excess enthalpy data for the ternary system methane—ethylene—carbon dioxide by flow calorimetry

Excess enthalpy data for the ternary system methane – ethylene – carbon dioxide was obtained utilizing an isothermal flow calorimeter. The measurements were made at three temperatures: 293.15, 305.15 and 313.15 K and pressures of 1.114, 1.520 and 3.445 MPa (11, 15 and 34 atm). The determination of excess enthalpies for the binary systems methane—ethylene, ethylene—carbon dioxide and methane—carbon dioxide has been reported in three preceeding articles, respectively: Gagné et al., 1985; Ba et al., 1979 and Barry et al., 1982a. The binary interaction coefficients k_ij obtained for these systems have been utilized as initial values for the optimization procedure leading to the k_ij for the ternary system. For the case of the ternary system studied in this investigation, two types of binary interaction coefficients k_ij have been determined from experimental data: k_ij independent of temperature and pressure and k_ij adjusted as function of temperature and pressure. Experimental data were compared with the predictions from Benedict—Webb—Rubin and Redlich—Kwong equations of state. In both cases, the coefficients k_ij dependent on temperature and pressure led to better prediction of excess enthalpies.