| 高强度船板钢中针状铁素体的原位观察 |
| |
| 引用本文： | 高立娜,张彩军,顾克井,朱立光.高强度船板钢中针状铁素体的原位观察[J].钢铁钒钛,2017,38(1). |
| |
| 作者姓名： | 高立娜 张彩军 顾克井 朱立光 |
| |
| 作者单位： | 1. 华北理工大学高品质钢连铸实验室,河北唐山,063009;2. 国丰钢铁有限公司,河北唐山,063009 |
| |
| 基金项目： | 国家自然科学基金项目，河北省自然科学基金资助项目 |
| |
| 摘 要： | 采用高温共聚焦显微镜对高强度船板钢中针状铁素体进行原位观察,并利用金相显微镜分析原位观察后其组织形态。结果表明,随着保温时间的增加,平均奥氏体晶粒尺寸增大。保温时间为900 s时获得的奥氏体尺寸更有利于针状铁素体的形核。随着保温时间的延长,铁素体开始相变的温度先减小后增加,而铁素体的相变结束温度逐渐减小。
|
| 关 键 词： | 船板钢 针状铁素体 高温共聚焦显微镜 夹杂物 奥氏体 晶粒尺寸 |
In-situ Observation of Acicular Ferrite in High Strength Ship-building Plate Steel |
| |
| Gao Lina,Zhang Caijun,Gu Kejing,Zhu Liguang.In-situ Observation of Acicular Ferrite in High Strength Ship-building Plate Steel[J].Iron Steel Vanadium Titanium,2017,38(1). |
| |
| Authors: | Gao Lina Zhang Caijun Gu Kejing Zhu Liguang |
| |
| Abstract: | The acicular ferrite in high strength ship plate steel was observed by confocal scanning laser microscope (CSLM),and morphology in steel of in situ observation was investigated by using optical microscopy.The results show that holding time of 900 s is in favor of acicular ferrite nucleation.The austenite grain size increases with increasing holding time.The austenite size that is acquired at 900 s of the holding time is more conducive to the nucleation of acicular ferrite.The starting formation temperature of ferrite firstly decreases with increasing holding time,then.increases.The ending formation temperature of ferrite decreases with increasing holding time. |
| |
| Keywords: | ship-building plate steel CSLM AF inclusion austenite grain size |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
