首页 | 官方网站   微博 | 高级检索  
     

基于经验小波变换的多通道微弱电流信号噪声控制
引用本文:于双江,倪建军,富帅.基于经验小波变换的多通道微弱电流信号噪声控制[J].计算机测量与控制,2024,32(2):122-128.
作者姓名:于双江  倪建军  富帅
作者单位:北京空间机电研究所,,
摘    要:多通道微弱电流信号受很多噪声因素的干扰,导致微弱电流信号输出相对误差增加,为此提出基于经验小波变换的多通道微弱电流信号噪声控制方法。采集多通道微弱电流信号,利用经验小波变换技术分解采集到的微弱电流信号,判断电流信号中是否存在噪声并确定噪声类型。装设微弱电流信号噪声控制器,根据电流信号中的噪声量与噪声类型生成控制指令,对不同通道微弱电流信号噪声进行控制。实验结果表明,该方法的多通道微弱电流信号信噪比较高,输出信号与原信号之间的相对误差较小,可以实现多通道微弱电流信号噪声控制。

关 键 词:经验小波变换  多通道  微弱电流信号  噪声控制  信号分解  噪声量  噪声类型
收稿时间:2023/1/16 0:00:00
修稿时间:2023/4/18 0:00:00

Noise control of multi-channel weak current signal based on empirical wavelet transform
Abstract:The multi-channel weak current signal is interfered by many noise factors, which leads to the increase of the relative error of the weak current signal output. Therefore, a multi-channel weak current signal noise control method based on empirical wavelet transform is proposed. Collect multi-channel weak current signal, decompose the collected weak current signal using empirical wavelet transform technology, judge whether there is noise in the current signal and determine the type of noise. A weak current signal noise controller is installed to generate control instructions according to the amount and type of noise in the current signal to control the weak current signal noise in different channels. The experimental results show that the signal to noise ratio of the multi-channel weak current signal is high, the relative error between the output signal and the original signal is small, and the multi-channel weak current signal noise can be controlled by this method.
Keywords:Empirical wavelet transform  Multi channel  Weak current signal  Noise control  Signal decomposition  Noise level  Noise type
点击此处可从《计算机测量与控制》浏览原始摘要信息
点击此处可从《计算机测量与控制》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号