| 177mmPQF无缝钢管穿孔机顶头冷却环系统改进 |
| |
| 引用本文： | 贾豹,毕辛,董华枫,赵春生.177mmPQF无缝钢管穿孔机顶头冷却环系统改进[J].鞍钢技术,2016(1):60-62. |
| |
| 作者姓名： | 贾豹 毕辛 董华枫 赵春生 |
| |
| 作者单位： | 鞍钢股份有限公司无缝钢管厂,辽宁鞍山,114021 |
| |
| 摘 要： | 对鞍钢股份有限公司无缝钢管厂无缝钢管穿孔机顶头冷却环系统存在的设计缺陷进行了分析,针对水嘴布置不合理、冷却水喷到毛管外部造成毛管外部氧化、喷到毛管内部破坏抗氧化剂作用等缺陷提出了改进方案,在冷却环前端安装了冷却水反冲洗装置,并对冷却环进行了改进,实施后取得了预期效果。
|
| 关 键 词： | 无缝管 穿孔机 冷却环 顶头 |
Improvement of Cooling Ring System for Piercing Point of 177 mm Piercing Mill for Making PQF Seamless Steel Tube |
| |
| Jia Bao,Bi Xin,Dong Huafeng,Zhao Chunsheng.Improvement of Cooling Ring System for Piercing Point of 177 mm Piercing Mill for Making PQF Seamless Steel Tube[J].Aisc Techniques,2016(1):60-62. |
| |
| Authors: | Jia Bao Bi Xin Dong Huafeng Zhao Chunsheng |
| |
| Abstract: | The design defects existed in the cooling ring system for the piercing point of the piercing mill for making seamless steel tubes in Seamless Steel Tube Plant of Angang Steel Co., Ltd. were analyzed. Based on the analytical results the upgrading scheme was proposed with regard to such defects as the unsuitable installation of the water nozzles, oxidizing occurred on the external surface of a hollow billet caused by the spraying of cooling water and weakening the effect of the antioxidant in the interior surface of the billet. According to the scheme the back flushing device for cooling water was installed in the front end of the cooling ring and meanwhile the cooling ring was also modified. So by these measures the desired effect was achieved. |
| |
| Keywords: | seamless steel tube piercing mill cooling ring piercing point |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
