| SiC_p/B_4C复合陶瓷的热压烧结及组织性能 |
| |
| 引用本文： | 魏红康,张玉军,邓翔宇.SiC_p/B_4C复合陶瓷的热压烧结及组织性能[J].中国陶瓷,2010(9). |
| |
| 作者姓名： | 魏红康 张玉军 邓翔宇 |
| |
| 作者单位： | 景德镇陶瓷学院;山东大学材料液态结构及其遗传性教育部重点实验室; |
| |
| 摘 要： | 以Si粉为烧结助剂,SiC颗粒为增强剂,采用真空热压烧结工艺制备了SiCp/B4C陶瓷基复合材料。研究了SiCp对复合材料力学性能的影响。借助X射线衍射、扫描电镜等分析了复合材料的物相组成和微观结构。研究表明:添加的SiCp中粒径小的颗粒被包裹在主晶相中,粒径较大的颗粒分布在晶界上,形成"晶内-晶间"混合型复合陶瓷。当SiCp含量为4wt.%时,复合材料的弯曲强度和断裂韧性分别达到431MPa和5.41MPa.m1/2。复合材料力学性能的提高主要是由于残余应力引起的晶界强化以及断裂方式的转变。
|
| 关 键 词： | 碳化硼 硅粉 SiCp 力学性能 微观结构 |
HOT-PRESS SINTERING, MICROSTRUCTURE AND PROPERTIES OF SiC_p/B_4C COMPOSITES |
| |
| Wei Hongkang,Zhang Yujun,Deng Xiangyu.HOT-PRESS SINTERING, MICROSTRUCTURE AND PROPERTIES OF SiC_p/B_4C COMPOSITES[J].China Ceramics,2010(9). |
| |
| Authors: | Wei Hongkang Zhang Yujun Deng Xiangyu |
| |
| Affiliation: | Wei Hongkang1,Zhang Yujun2,Deng Xiangyu1(1 Jingdezhen Ceramic Institute,Jingdezhen 333001,2 Key Laboratory for Liquid Structure and Heredity of Materials of Education Ministry,Shandong University,Jinan 250061) |
| |
| Abstract: | SiCp/B4C composites were prepared by hot pressing under vacuum with Si powder and SiCp as sintering aid and reinforcement agent respectively.The effect of SiCp content on the mechanical properties of composites were studied.Phase composition and microstructure of B4C based composites were characterized by means of XRD and SEM.The results showed that the SiCp of small particle size were embedded into the boron carbide grains,meanwhile,those of big particle size sited along the grain boundaries,and thereby,in... |
| |
| Keywords: | Boron carbide Silicon SiCp Mechanical properties Microstructure |
| 本文献已被 CNKI 等数据库收录！ |
|
