| 高强钢板热冲压成形热力耦合数值模拟 |
| |
| 引用本文： | 刘红生,包军,邢忠文,宋宝玉,杨玉英.高强钢板热冲压成形热力耦合数值模拟[J].材料科学与工艺,2010,18(4):459-463. |
| |
| 作者姓名： | 刘红生 包军 邢忠文 宋宝玉 杨玉英 |
| |
| 作者单位： | 哈尔滨工业大学,机电工程学院,哈尔滨,150001;哈尔滨工业大学,材料科学与工程学院,哈尔滨,150001 |
| |
| 基金项目： | 黑龙江省自然科学基金资助项目(E2007-11); 国家博士后基金资助项目(20080440846) |
| |
| 摘 要： | 为研究高强钢板的热冲压成形性,采用ABAQUS软件对高温下22MnB5高强钢板沟槽形件冲压成形进行了数值模拟研究.建立了基于热力耦合的弹塑性有限元模型和热成形下的材料模型,通过对沟槽形件热成形进行数值模拟,考察了压边力、模具间隙和凹模圆角半径等工艺参数对热成形时温度分布和回弹的影响,给出了热成形中产生回弹的机理,确定了合适的工艺参数,通过热成形试验验证了数值结果的可靠性.
|
| 关 键 词： | 数值模拟 有限元 高强钢 热冲压 热力耦合 |
Numerical simulation on channel shape hot stamping of 22MnB5 high-strength sheet metal based on thermo-mechanical coupled method |
| |
| LIU Hong-sheng,BAO Jun,XING Zhong-wen,SONG Bao-yu and YANG Yu-ying.Numerical simulation on channel shape hot stamping of 22MnB5 high-strength sheet metal based on thermo-mechanical coupled method[J].Materials Science and Technology,2010,18(4):459-463. |
| |
| Authors: | LIU Hong-sheng BAO Jun XING Zhong-wen SONG Bao-yu and YANG Yu-ying |
| |
| Affiliation: | LIU Hong-sheng1,BAO Jun1,XING Zhong-wen1,SONG Bao-yu1,YANG Yu-ying2(1.School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China,2.School of Materials Science , Engineering,China) |
| |
| Abstract: | In order to study the hot stamping of high-strength sheet metal,numerical simulation on 22MnB5 high-strength sheet metal forming at high temperature was conducted through the commercial software ABAQUS.In order to obtain accurate numerical results,an elasto-plastic finite element model based on thermo-mechanical coupled method and a material model were set up.Influences of processing parameters,such as blank holder force,clearance and radius of corner on the temperature distribution and springback were inve... |
| |
| Keywords: | simulation finite element high-strength steel hot stamping thermo-mechanical coupled method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《材料科学与工艺》浏览原始摘要信息 |
|
点击此处可从《材料科学与工艺》下载全文 |
|
