| 大口径纹影系统主反射镜装调结构分析与设计 |
| |
| 引用本文： | 孙威,李泽仁,汪伟,桑永生,郭江建.大口径纹影系统主反射镜装调结构分析与设计[J].深圳大学学报(理工版),2010,27(2). |
| |
| 作者姓名： | 孙威 李泽仁 汪伟 桑永生 郭江建 |
| |
| 作者单位： | 中国工程物理研究院流体物理研究所,绵阳,621900 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 研制纹影测试系统中大口径主球面反射镜的装调结构.利用有限元法,对有效通光口径直径为800 mm的主镜进行应力和面变形分析.采用断裂几率预测法校核玻璃机械强度,通过优化得出反射镜面变形的均方根(rootmean square,RMS),以此为依据,设计出满足系统技术要求的主镜装调结构.
|
| 关 键 词： | 仪器仪表技术 纹影测试系统 大口径反射镜 钢带支撑 机械强度设计 镜面变形 |
Structural analysis and design for the supporting and adjusting of the primary mirror in schlieren system with large aperture |
| |
| SUN Wei,LI Ze-ren,WANG Wei,SANG Yong-sheng,GUO Jiang-jian.Structural analysis and design for the supporting and adjusting of the primary mirror in schlieren system with large aperture[J].Journal of Shenzhen University(Science &engineering),2010,27(2). |
| |
| Authors: | SUN Wei LI Ze-ren WANG Wei SANG Yong-sheng GUO Jiang-jian |
| |
| Abstract: | A mechanical structure was designed to support and adjust the primary mirror with large aperture in a schlieren system.A stress and surface deformation analysis of the 800 mm diameter mirror,used in hypersonic wind tunnel schlieren system,was given by means of the finite element method.We determined the mechanical strength of the glass and calculated the optimized root mean square (RMS) value of the mirror's surface deformation.From the analysis results,we were able to design a supporting and adjusting structure that satisfied the requirements of the system. |
| |
| Keywords: | instrument technology schlieren test system mirror with large aperture steel belt support mechanical strength mirror surface deformation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
