| 基于S3C2410的嵌入式Linux的移植方法 |
| |
| 引用本文： | 陈铁军,仇洪冰.基于S3C2410的嵌入式Linux的移植方法[J].桂林电子科技大学学报,2006,26(4):259-263. |
| |
| 作者姓名： | 陈铁军 仇洪冰 |
| |
| 作者单位： | 桂林电子科技大学,通信与信息工程系,广西,桂林,541004;玉林师范学院,职业技术学院,广西,玉林,537000;桂林电子科技大学,通信与信息工程系,广西,桂林,541004 |
| |
| 摘 要： | 在嵌入式系统里基于ARM的嵌入式处理器已经成为市场主流,移植操作系统是开发嵌入式系统的前提和基础,而嵌入式操作系统的移植比较复杂.通过将嵌入式Linux 2.6内核移植到S3C2410处理器的目标板上,提出了嵌入式Linux移植的方法与具体实现过程.编译生成的内核在嵌入式系统中运行稳定,制作的根文件系统可以通过Ramdisk方式正常加载进内核.结果证明方法可行,同时对于开发其它类型的嵌入式系统具有一定的参考意义.
|
| 关 键 词： | 嵌入式Linux 交叉编译 移植 操作系统 内核 |
| 文章编号： | 1001-7437(2006)04-0259-05 |
| 修稿时间： | 2006年6月25日 |
Method for porting embedded Linux based on S3C2410 |
| |
| CHEN Tie-jun,QIU Hong-bin.Method for porting embedded Linux based on S3C2410[J].Journal of Guilin Institute of Electronic Technology,2006,26(4):259-263. |
| |
| Authors: | CHEN Tie-jun QIU Hong-bin |
| |
| Abstract: | ARM processor has already become the lead in the market of embedded system.Porting operating system is the precondition and the foundation for the development of an embedded system.However,porting embedded operating system can be very complicated.This paper discusses the method and the steps of porting embedded Linux by porting embedded Linux 2.6 kernel inside the target board of S3C2410 processor.The compiled Linux kernel circulating in the embedded system shows stability and the root file system can be normally loaded into kernel by Ramdisk.The result proved that the method is workable and has implications for other embedded operating system. |
| |
| Keywords: | embedded Linux cross compile porting operating system kernel |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
