| HDPE 5000S在共混挤出板材中的应用 |
| |
| 引用本文： | 樊洁,李艳芹,张翠玲,吴宇.HDPE 5000S在共混挤出板材中的应用[J].合成树脂及塑料,2020,37(2):45-48. |
| |
| 作者姓名： | 樊洁 李艳芹 张翠玲 吴宇 |
| |
| 作者单位： | 中国石油天然气股份有限公司兰州化工研究中心,甘肃省兰州市 730060,中国石油天然气股份有限公司兰州化工研究中心,甘肃省兰州市 730060,中国石油天然气股份有限公司兰州化工研究中心,甘肃省兰州市 730060,中国石油天然气股份有限公司兰州化工研究中心,甘肃省兰州市 730060 |
| |
| 摘 要： | 对不同装置生产的高密度聚乙烯5000S的分子链结构、基础物性、旋转流变性能及加工流变性能等进行了对比分析。结果表明:由于5000S-3的相对分子质量较高,支化度较小,导致其储能模量及熔体拉伸强度较大,5000S-3与线型低密度聚乙烯7042共混挤出的板材没有出现破洞;5000S-3的高相对分子质量(大于10×10^5)部分含量较5000S-2低,低相对分子质量(小于1×10^4)部分含量较5000S-1高,且其相对分子质量分布较宽,所以加工性能最好,提高温度可改善原料在加工过程中的不稳定流动现象。
|
| 关 键 词： | 高密度聚乙烯 储能模量 熔体拉伸强度 不稳定流动 |
Application of HDPE 5000S in blended extruded sheet |
| |
| Fan Jie,Li Yanqin,Zhang Cuiling,Wu Yu.Application of HDPE 5000S in blended extruded sheet[J].China Synthetic Resin and Plastics,2020,37(2):45-48. |
| |
| Authors: | Fan Jie Li Yanqin Zhang Cuiling Wu Yu |
| |
| Affiliation: | (Lanzhou Petrochemical Research Center,PetroChina,Lanzhou 730060,China) |
| |
| Abstract: | High density polyethylene 5000S produced from different plants were compared in terms of the molecular chain structure,basic physical properties,rotating rheology and processing rheological properties.The results show that the storage modulus and tensile strength of melt of 5000S-3 are higher due to the high molecular weight and low branching degree.No holes are found in the extruded sheet of blended 5000S-3 and linear low density polyethylene 7042.The content of high molecular weight part(higher than 10×10^5)in 5000S-3 is lower than that of 5000S-2,while the low molecular weight part(lower than 1×10^4)in 5000S-3 is higher than that of 5000S-1,so its processing performance is the best a long with wider relative molecular weight distribution.Increasing temperature can improve the unstable flow of raw materials during processing. |
| |
| Keywords: | high density polyethylene storage modulus melt tensile strength unstable flow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
